ÖKO-LAVAMAT 70630 update
The environmentally friendly washing machine
User information
Contents
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Environmental tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
6
8
8
Unit description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drawer for detergent and care agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
9
9
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Program Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Additional program buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Consumption Values and Time Requirements . . . . . . . . . . . . . . . . . . . . . 13
Running time display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
What does "UPDATE“ mean? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Before the First Wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Prepare washing cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Sort washing and prepare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Washing Types and Care Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Washing Detergents and Care Agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Which washing detergent and care agent? . . . . . . . . . . . . . . . . . . . . . . 17
How much washing detergent and care agent? . . . . . . . . . . . . . . . . . . . 17
Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Run a Washing Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Brief Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setting the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Change Spin Speed / Select Rinse Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Set the delay timer/soaking duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Opening and Closing the Filling Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Add the washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Add Washing Detergent/Care Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Starting the washing program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Completion of the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
The washing cycle is finished/Remove the washing . . . . . . . . . . . . . . . . . . 25
3
Program Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Separate Conditioning/Starching/Impregnating . . . . . . . . . . . . . . . . . . . . 27
Separate Rinse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Separate Spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Detergent Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Washing Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Main door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Cleaning the drain pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
What to do if... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Remedying faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
If the washing results are not satisfactory . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Carrying out emergency drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Additional rinsing cycle (RINSE+) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Child Safety Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Installation and connection instructions . . . . . . . . . . . . . . . . 40
Installation Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Installation of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Remove transportation protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Prepare the installation place . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Installation on a concrete base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Installation on vibrating floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Compensate for floor unevenness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
4
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Permissible water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Water inflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Water drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Delivery heads over 1m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Warranty conditions / Customer service centres . . . . . . . 49
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
5
Operating Instructions
Operating Instructions
1 Safety
The safety aspects of AEG electrical appliances comply with accepted
technical standards and the German Appliance Safety Law. However, as
manufacturers we regard it as our responsibility to inform you about
the following safety instructions.
Before Using for the First Time
• Refer to the "Installation and Connection Instructions" further on in
this user information.
• If units are delivered in the winter months at minus temperatures:
Store the washing machine at room temperature for a few hours be-
fore putting it into operation.
Correct Use
• The washing machine is only intended for washing normal domestic
washing. If the appliance is used for a wrong purpose or wrongly op-
erated, the manufacturer cannot assume any liability for any dam-
ages.
• Additions or modifications to the washing machine are strictly for-
bidden due to safety reasons.
• Use only detergent which is suitable for washing machines. Refer to
the detergent manufacturer's instructions.
• The washing must not contain any flammable solvents. Also bear this
in mind when washing pre-cleaned washing.
• Do not use the washing machine for dry-cleaning.
• Dyes /dye-removing agents may only be used in the washing machine
if the manufacturer expressly permits use of these products. We can-
not accept liability for any damage.
• Use only water from the water mains. Use rain water or service water
only if it meets the requirements defined in DIN 1986 and DIN 1988.
• Frost damage is not covered by the warranty! If the washing machine
is in a room subject to possible frost hazards, emergency emptying
must be carried out if there is a risk of frost (see the Section "Carry-
ing out emergency emptying“).
6
Operating Instructions
Child Safety
• Packaging materials (e.g. films, polystyrene) can be dangerous for
children. Risk of suffocation! Keep packaging away from children.
• Children frequently cannot recognise hazards involved in handling
electrical appliances. Therefore, ensure that they are properly super-
vised during operation and never allow children to play with the
washing machine -there is a risk that they can lock themselves inside it.
• Ensure that children or small animals do not climb into the washing
machine's drum.
• When disposing of washing machines pull out the mains plug, destroy
the door lock, cut off the electrical supply lead and dispose of the
plug and remaining cable. This means that playing children cannot
shut themselves in and cannot encounter a potentially lethal hazard.
General Safety
• Repairs to the washing machine may only be carried out by qualified
specialists. Incorrect repairs may result in significant risk to the user.
If repairs are necessary, consult our customer service or your special-
ist dealer.
• Never use the washing machine if the mains cable is damaged or the
conrol panel, work surface or base panel area are so badly damaged
that the interior of the unit is openly accessible.
• Switch off the washing machine before carrying out cleaning, care
and maintenance work. Also pull the mains plug out of the socket or,
– if it is permanently connected, – switch off the circuit breaker at
the household power distribution box or completely remove the
screw-in fuse.
• Never pull the cable to remove the plug from the socket. Always
pull the plug itself.
• Multiple connectors, couplings and extension cables must not be
used. There is a risk of fire with overheating!
• Do not spray down the washing machine with a water jet. Risk of
electric shock!
• The glass in the door becomes hot in the case of wash programmes
with high temperatures. Do not touch!
• Allow the washing solution to cool before carrying out an emergency
emptying operation or cleaning the drain pump.
• Small animals can chew the power cables and water hoses. Risk of
electric shock and danger of water damage! Keep small animals away
from the washing machine.
7
Operating Instructions
2 Disposal
Disposing of the Packaging Material!
Dispose of the packaging of your washing machine correctly. All pakka-
ging materials used are environmentally-compatible and recyclable.
• Plastic parts are identified with internationally standardised abbrevi-
ations:
>PE<
>PS<
for polyethylene, e.g. packing films.
for polystyrene, e.g. cushion parts (always CFC-free)
>POM< for polyoxymethylene, e.g. plastic clips.
• Cardboard packaging is manufactured from recycled paper and
should be deposited in the waste paper collection for recycling.
Disposing of your old appliance!
When you put your unit out of operation one day, please bring it to
your nearest recycling centre or to your dealer.
2 Environmental tips
• A pre-wash cycle is not necessary in the case of washing which is not
excessively dirt. This saves detergent, water and time (and is gentle on
the environment.)
• If the indicated load capacities are taken full advantage of, the wash-
ing machine is especially efficient.
• For small loads, use only one half to one third of the recommended
detergent quantity.
• Suitable pre-treatment enables marks and limited amounts of dirt to
be removed. You can then wash at a lower temperature.
• Wash slightly to normally dirty cottons with the energy-saving pro-
gram.
• There is often no need for the softener. Try it once! If you use a drier,
your washing will become soft and fluffy even without a softener.
• In the case of medium to high water hardness (hardness range runs to
upwards, see "Detergent and care agents“), you should use a water
softener. The detergent can then always be metered for hardness
range I (= soft).
8
Operating Instructions
Unit description
Front view
Drawer for de-
tergent and
care agent
Control panel
Rating plate (be-
hind filling door)
Main door
Flap in front of
drain pump
Screw feet
(height-adjustable)
Drawer for detergent and care agent
Stain removers
Pre-wash detergent/
soaking agent or
water softener
Main wash detergent
(powder form) and
possibly water softener
Liquid care agents
(conditioner,
finisher, starch)
9
Operating Instructions
Control panel
Program sequence display
Program selector
Spin speed / RINSE HOLD button
Additional program
buttons
DOOR Indicator
Multi-display
Button DELAY TIMER
START/PAUSE button
OVER DOSING display
Program Selector
The program selector determines
the type of washing cycle (e.g.
water level, drum movement,
number of rinses, spin speed) ac-
cording to the type of garments
being washed, and
also the washing solution.
OFF
Switches off the washing ma-
chine. All other positions
are "switched on".
COTTONS/LINEN
Main washing cycle Cottons/Linen at 30 °C to 95 °C.
ENERGY SAVING position: Energy-saving program at approx. 67 °C for
slightly to normally dirty cottons, extended washing time (cannot be
combined with QUICK WASH and STAIN).
2
10
Operating Instructions
EASY-CARES
Main washing cycle for easy-care textiles (mixed fabrics) at 40 °C to
60 °C.
EASY IRON position: Main washing cycle at 40 °C for easy-care textiles
which, with the aid of this program, only have to be either gently
ironed or not ironed at all.
DELICATES
Main washing cycle for delicates at 30 °C or 40 °C.
WOOL/P (Handwash)
Main washing cycle (cold up to 40 °C) for machine-washable woollens
and for hand-washable wool textile and silk with the care symbol
ï (handwash).
GENTLE RINSE
Separate gentle rinse e.g. for rinsing hand-washed textiles (2 rinses,
liquid care agent from rinsing compartment æ is added, short spin).
STARCHING
Separate starching, separate conditioner, separate impregnation of
damp washing (1 rinse, liquid care agent from the rinsing compartment
æ is added, spin).
PUMP OUT
Pumping off the water after a rinse hold (without spin).
RINSE HOLD means: The washing remains lying in the last rinsing water.
It is not spun.
3
SPIN
Pumping off the water after a rinse hold and spin, or separate spin of
hand-washed cottons/linen.
SHORT SPIN
Pumping off the water after a rinse hold and short spin or separate
short spin of sensitive textiles (easy-care washing, delicates, woollens).
11
Operating Instructions
Additional program buttons
The additional program buttons are for adapting
the washing program to the dirtiness of the
washing. Additional programs are not required for
washing which is not excessively dirty.
Various functions can be combined with each
other, depending on the program.
PRE WASH
Cold pre wash before the main washing cycle
which follows on automatically. with intermediate
spin at COTTONS/LINEN, without intermediate
spinning in the case of EASY CARES and DELI-
CATES.
SOAKING
Approx. 1 hour at 30 °C or 40 °C, depending on the set program. Can be
extended with the button DELAY TIMER by max. 19 hours. This is fol-
lowed by the main washing cycle.
QUICK WASH
Shortened washing cycle for slightly dirty washing.
STAIN
For treating very dirty washing or stained washing. (In-wash stain
treatment is added during the program on a time-optimized basis)
With the setting WOOL / P (Hand wash) it is not possible to select the
additional programs (any buttons pressed have no effect).
3
12
Operating Instructions
Consumption Values and Time Requirements
The values for selected programs in the following tables were deter-
mined under normal conditions. However, there is a helpful orientation
aid for domestic operation.
Program Selector/
Temperature
Filling Quantity Water
Energy
Time
in kg
in Litres in kWh in Minutes
COTTONS/LINEN 95
5
5
45
42
49
54
50
48
1.70
0.94
0.60
0.50
0.30
0.20
137
125
122
102
68
COTTONS/LINEN 601)
COTTONS/LINEN 40
EASY-CARES 40
5
2.5
2.5
2
DELICATES 30
WOOL/P (Handwash) 30
37
1) Note: Program setting for a test in accordance with EN 60 456. The consumption
values can deviate from the stated values depending on the water pressure,
hardness, inlet temperature, room temperature, type and quantity of washing,
the washing powder/liquid used, fluctuations in the mains voltage and selected
additional functions.
Running time display
The durations of the washing programs depend
3
on the washing habits and ambient conditions
at the installation location. E. g. the washing
type, washing quantity, type of detergent, wa-
ter temperature and room temperature etc.
can influence the duration of the washing program.
The washing machine saves from each program the running times of
the last wash cycles and calculates from them the average running time
for a washing cycle. This average running time is shown by the Multi-
display during the next wash.
After several washes, the running time shown in the multi display is
thereby adapted to the usual washing practice and the ambient condi-
tions at the installation location.
13
Operating Instructions
What does "UPDATE“ mean?
Your washing machine's washing programs are controlled by software.
New types of textiles or new detergents may require new washing pro-
grams in the future. In most cases, the software can be adapted to this.
For further information on the "update“, please consult the Customer
Service. You can also enquire about the costs for an "update“ with your
Customer Service.
Before the First Wash
0
Carry out a washing operation without washing (COTTONS 95 °C, with
half the quantity of washing powder/liquid).
This removes residues left over from production on the drum and solu-
tion container.
14
Operating Instructions
Prepare washing cycle
Sort washing and prepare
• Sort the washing according to the care symbol and type (see "Wash-
ing types and care codes").
• Empty all pockets.
• Remove metal objects (paper clips, safety pins etc.).
• To prevent damage to the washing and tangled washing: Close zip
fasteners, button bed and pillow covers closed, tie up loose strings
e.g. of aprons.
• Turn articles with double layered textiles inside out (sleeping bags,
anoraks etc.).
• In the case of knitted coloured textiles and also with wool and tex-
tiles with jewelry attached: turn inside out.
• Wash small and sensitive items (e.g. baby socks, tights and stockings,
bras etc.) in a washing net, a cushion with a zip fastener or in larger
socks.
• Handle curtains with particular care. Metal rollers or burred, plastic
rollers must be removed or tied into a net or bag. We cannot accept
liability for damage.
• Coloureds and white items must not be washed together in a washing
cycle. This could discolour white washing or turn it grey.
• There is often excess dye in new, coloured items. It is best to wash
such items separately the first time.
• Mix small and large items. This improves the washing effect and the
washing is more favourably distributed during spinning.
• Fluff washing before placing into the washing machine.
• Do not place folded washing into the drum.
• Pay attention to the care instruction "wash separately" and "wash
separately several times".
15
Operating Instructions
Washing Types and Care Codes
The care codes help you choose the correct washing program.
The washing should be sorted according to type and care code.
The temperatures stated in the care codes are all maximum values.
Cottons ç
Textiles made of cotton and linen with this care code are insensitive to
mechanical stress and high temperatures. The program COTTONS/LINEN
is suitable for this type of washing.
Linen è ë
Textiles made of cotton and linen with this care code are insensitive to
mechanical stresses. The program COTTONS/LINEN is suitable for this
type of washing.
Easy-Care Garments ê í
Textiles such as finished cottons, cotton mixtures, viscose and synthet-
ics with this care code require mechanically more mild treatment. The
program EASY-CARES/EASY IRON is suitable for this type of washing.
Delicates ì
Textiles such as layered fibres, microfibres, viscose, synthetics and cur-
tains with this care code require very gentle treatment.
The program DELICATES is suitable for this type of washing.
Wool and Very Sensitive Washing 9 ì ï
Textiles such as wool, wool mixtures and silk with this care code are es-
pecially sensitive to mechanical stresses.
The program WOOL/P (Handwash) is suitable for this type of textiles.
Attention! Textiles with the care code
washed in the washing machine!
(Do not wash!) must not be
ñ
16
Operating Instructions
Washing Detergents and Care Agents
Which washing detergent and care agent?
Use only washing detergents and care agents which are suitable for use
in washing machines. Always follow the manufacturer's instructions.
How much washing detergent and care agent?
The amount to be used depends on:
• the dirtiness of the washing
• the hardness category of the mains water supply
• the filling quantity
If the detergent manufacturer gives no details of the dosing quantities
for minimum loads, add one third less for half loads and, in the case of
very small loads and for EASY IRON, only half the amount of detergent
recommended for a full load.
2
Refer to the detergent/care agent manufacturer's instructions on use
and dosage.
Water softener
For medium to high water hardness (hardness class II upwards), you
should use softener. Refer to the manufacturer's instructions. Then al-
ways add the appropriate amount of detergent for hardness class I
(= soft). The responisable water works will provide information on the
local water hardness.
Since the water softener is rinsed in before the main detergent (water
pre-softening), 80% of the stated quantity of softener shown on the
package is sufficient.
2
Water hardness details
Water hardness in °dH
(German hardness scale)
Water hardness in mmol
(millimol per litre)
Hardness class
I - soft
0 - 7
7 - 14
to 1.3
1.3 - 2.5
II - medium hard
III - hard
14 - 21
2.5 - 3.8
IV - very hard
greater than 21
greater than 3.8
17
Operating Instructions
Run a Washing Cycle
Brief Instructions
A washing cycle is run in the following steps:
0 1. Set the correct washing program:
– Set the program and temperature with the program selector
– Set any additional program(s)
2. Change the spin speed if necessary / select RINSE HOLD.
3. Set DELAY TIMER if necessary.
4. Open the filling door and fill with washing.
5. Close the filling door.
6. Add washing detergent/care agent.
7. Start the washing program.
After the Washing Program Ends:
Attention! If the washing cycle ended with Rinse Hold, before opening
the filling door carry out PUMP, SPIN or SHORT SPIN.
8. Open the filling door and remove the washing.
9. Switch off the washing machine: Set the program selector to OFF.
18
Operating Instructions
Setting the Washing Program
For the suitable program, the correct temperature and possible addi-
tional programs for the particular washing type, refer to the "Program
tables".
3
0 1. Set the program selector to the
required washing program with
the required temperature.
The probable duration of the set
program in minutes is shown in
the multi display.
2. If necessary, select additional program(s):
The display of the selected auxiliary program
lights up.
– To change the selection, press another button.
– To deselect, press the button again.
19
Operating Instructions
Change Spin Speed / Select Rinse Hold
0
If necessary, change the spin speed for the final
spin / select RINSE HOLD:
Press the button Spin speed/RINSE HOLD as often
as necessary until the indicator for the required
spin speed (or of RINSE HOLD) lights up.
If RINSE HOLD is selected, the washing remains in
the last rinsing water and is not spun.
If you do not change the spin speed, the final spin
is automatically adapted depending on the washing program:
3
– COTTONS/LINEN
– EASY-CARES/EASY IRON
– DELICATES
1000 revolutions per minute
1000 revolutions per minute
1000 revolutions per minute
1000 revolutions per minute
– WOOL/P (Handwash)
The speed of the intermediate spin depends on the selected program
and cannot be changed.
Set the delay timer/soaking duration
Delay timer
The button DELAY TIMER enables you to delay the start of a washing
program between 1 and max. 19 hours.
0
To do this, press the button DELAY TI-
MER as often as necessary until the re-
quired start delay is shown in the Multi-
display, e.g. in the form 12hto delay
the program start for 12 hours.
If 19his displayed and you press again,
the run time of the washing program set appears display in minutes,
e.g. 125). No delay timer can be set in this state.
Soaking duration
With the SOAKING button pressed, you can extend the soaking dura-
tion with the button DELAY TIMER from 1 to max. 19 hours.
Without delay timer, the soaking duration is approx. 1 hour.
3
20
Operating Instructions
Opening and Closing the Filling Door
0
0
Open: Pull on the handle of the filling door.
Close: Press the filling door firmly closed.
The indicators DOOR and START/PAUSE show whether
the door can be opened while the appliance is
switched on:
Indicator DOOR
Glows green
Glows red
Indicator START/PAUSE
Flashes red
Opening door possible?
Yes
No1)
Glows red
1) The filling door is locked because of a high water level or a high temperature.
If
3
– the error code Cdis shown in the multi-display and
– the indicators PRE WASH, RINSE and RINSE+ flash
you tried to start a washing program without first closing the filling
door properly. In this case push the door shut firmly and restart the
washing program.
Add the washing
For the maximum filling quantities, see the "Program tables".
See "Sort and prepare washing" for information on correctly preparing
the washing.
3
0 1. Sort and prepare the washing according to type.
2. Open the filling door: Pull on the handle of the filling door.
3. Fill with washing.
Important! When closing the door, make sure no items of washing get
stuck! This could damage textiles and the unit.
4. Close the filling door securely.
21
Operating Instructions
Add Washing Detergent/Care Agent
Refer to the information on washing detergents and care agents, see
section ”Washing Detergents and Care Agents”.
3
0 1. Open the washing detergent drawer: grip
inside the flap on the drawer at
the bottom (1) and pull out the drawer as
far as it will go (2).
2. Fill with washing detergent/
care agent
Compartment for in-wash stain
treatment
Compartment for main washing
powder
(If you use water softener and need the
right compartment for the pre-wash/
soaking agent, add the water softener
to the main washing detergent in the
left compartment.)
Compartment for liquid care agent
(Conditioner, finisher, starch)
Attention! Do not fill the compartment above
the MAX mark. If necessary, dilute viscous agent
up to the MAX mark, and dissolve powder starch.
Note: It is normal for a small amount of water
to be left in the compartment for liquid care agent;
this will not affect the wash results.
Compartment for pre-wash agent/soaking agent
(only for additonal programs PRE WASH and SOAKING
or for water softener
3. Push the drawer fully in.
If using liquid detergent / tablets
3
Add liquid detergent / tablets in the quantity recommended by the
washing detergent manufacturer. Add liquid detergent with dosage
containers provided by the detergent manufacturer.
22
Operating Instructions
Starting the washing program
0 1. Check that the water tap is open.
2. Start the washing program:
Press the START/PAUSE button
The washing program is started or starts at the
end of the time delay set.
The door is not correctly closed if, when the button START/PAUSE
is pressed,
3
– the error code Cdis shown in the multi-display and
– the indicators PRE WASH, RINSE and RINSE+ flash
In this case, press the door firmly closed and again press the
START/PAUSE button.
If the delay timer has been set:
The start time delay set on the time delay counts down; the time
remaining until the program starts is displayed in the multi-display
(in hours remaining, e.g. 5h). During this time you can add washing and
change or stop the delay timer.
• Load the washing: Press the START/PAUSE button. The door can be
opened. Then close the door and press the START/PAUSE button
again.
• Changing or stopping delay timer: Press the DELAY TIMER button re-
peatedly until the desired time is displayed. When the program dura-
tion is displayed (display in minutes e. g.125) the washing program
starts without delay.
23
Operating Instructions
Completion of the Washing Program
Program sequence display
Before the start, the program steps to be
carried out are indicated by the Program se-
quence display. The current program
step is displayed during the wash program.
Multi-display
The expected remaining run time (in minutes)
is shown in the multi-display until the program
ends.
With automatic program adaptation by the controller of the washing
3
machine (quantity of washing, type of washing, imbalance recognition,
special rinse etc.), it is possible to stop or correct the counting of the
remaining run time.
Change the Spin Speed
During the wash program, the spin speed can still be changed or RINSE
HOLD can be set.
Other settings cannot be changed.
Abort program
0
To prematurely abort the washing program, turn the program selector
to OFF.
With the button START/PAUSE, it is possible at any time to interrupt
the washing program and to continue it again by pressing the button
again.
3
24
Operating Instructions
The washing cycle is finished/Remove the washing
After a washing program has ended, the indicator END lights up on the
program sequence display.
• If the program EASY IRON was chosen, an anti-creasing phase of ap-
prox. 30 minutes follows after the program ends. The Multi-display
shows a remaining time and the indicator END lights up. During the
anti-crease phase you can open the filling door at any time and re-
move the washing.
• If RINSE HOLD was selected, the indicator next to the button START/
PAUSE flashes.
0 1. After a rinse hold, it is first necessary to pump off the water:
– Either press the button START/PAUSE (water is pumped off and the
washing is spun according to the completed program; With the but-
ton Spin speed/RINSE HOLD it is possible to also change the spin
speed during spinning),
or
– Turn the program selector to PUMP OUT and press the START/PAUSE
button (the water is pumped off without spinning),
or
– Turn the program selector to SPIN or SHORT SPIN and press the
button START/PAUSE (water is pumped off and the washing is spun
or gently spun).
The indicator END lights up at the end of this program step.
2. Open the filling door. As soon as the indicator DOOR lights up green,
the filling door can be opened.
3. Remove the washing.
4. Turn the program selector to OFF.
5. Close the water tap.
6. After washing, pull out the washing detergent drawer slightly so that it
can dry out. Only lean the door against the washing machine so that
the latter can air out.
If the display OVER DOSING lights up, too much
3
washing detergent was used in the washing program
just ended. During the next wash, pay attention to
the dosing information of the washing detergent
manufacturer and pay attention to the filling quantity!
Important! If the washing machine is not used for a long time:
Close the water tap and disconnect the washing machine from the
electricity mains.
25
Operating Instructions
Program Tables
Washing
Not all possible settings are listed below - only the ones most com-
monly used in everyday operation and the most appropriate ones.
Max.
Filling Quantity
(dry weight)1)
Possible
Additional
Programs
Type of Washing,
Care Codes
Program Selector
Temperature
PRE WASH
SOAKING
QUICK WASH
STAIN
Cottons
ç
COTTONS/LINEN
95
5kg
Energy-Saving Program:
Cottons ç
COTTONS/LINEN
ENERGY SAVING
PRE WASH
SOAKING
5kg
5kg
PRE WASH
SOAKING
QUICK WASH
STAIN
Linen
COTTONS/LINEN
30 to 60
è
ë
EASY-CARES
40 to 60
PRE WASH
SOAKING
QUICK WASH
STAIN
2.5kg
1kg
Easy-Cares
ê
í
EASY IRON2)
40
PRE WASH
SOAKING
QUICK WASH
STAIN
2.5kg
(or 15-20m2
curtains)
Delicates
ì
DELICATES
30, 40
P
Woollens/Handwash
2kg
WOOL
9
ì
ï
COLD to 40
1) A 10-litre bucket holds approx. 2.5kg of dry washing (cottons).
2) Only if a filling quantity of 1kg is observed are creases in the washing largely
avoided.
5 to 7 easy-care men's shirts are equivalent to about 1kg of dry washing.
26
Operating Instructions
Separate Conditioning/Starching/Impregnating
Max. Filling Quantity
(dry weight)
Type of Washing
Program Selector
Cottons/Linen
5kg
STARCHING
Separate Rinse
Max. Filling Quantity
(dry weight)
Type of Washing
Program Selector
Cottons/Linen
Easy-Cares
5kg
2.5kg
2.5kg
2kg
GENTLE RINSE
Delicates
Woollens/Handwash
Separate Spin
Max. Filling Quantity
(dry weight)
Type of Washing
Program Selector
Cottons/Linen
Easy-Cares
5kg
2.5kg
2.5kg
2kg
SPIN
Delicates
SHORT SPIN
Woollens/Handwash
27
Operating Instructions
Cleaning and Care
Control panel
Important! Do not use any furniture cleaning agents or aggressive
cleaning agents in order to clean panel and control parts.
0
Wipe control panels with a damp cloth. When doing so, use warm wa-
ter.
Detergent Drawer
The detergent drawer should be cleaned from time to time.
0 1. Pull the detergent drawer out as far as it will go.
2. Remove the detergent drawer by pulling sharply.
3. Take the conditioner insert out of the
middle compartment.
4. Clean the conditioner insert under
running water.
5. Clean the compartments with warm
water from the rear side. It is best to
use a flat brush.
6. Push on the conditioner insert as far as it will go so that it is securely in
place.
28
Operating Instructions
7. Use a brush to clean the entire
rinsing-in section of the washing
machine, particularly also the noz-
zles on the top side of the rinsing-
in chamber.
8. Set the detergent drawer into the
guide tracks and push in.
Washing Drum
The washing drum is made of stainless steel. Rusting foreign bodies in
the washing can cause rust deposits on the drum.
Important! Do not clean the stainless steel drum with decalcifying
agents containing acids, scouring agents containing chlorine or iron, or
steel wool. Our Customer Service can provide suitable agents.
0
Remove any rust deposits on the drum using a stainless steel cleaning
agent.
Main door
0
Check on a regular basis to see if deposits or foreign objects are present
in or at the rubber sleeve behind the door, and remove.
29
Operating Instructions
Cleaning the drain pump
Paper clips, nails and so on can sometimes get into the washing ma-
chine with the washing and remain in the drain pump casing. Fluff and
strands of fabric can gather on these items and block the drain pump.
Therefore the drain pump should be cleaned at least once a year.
Warning! Switch off the washing machine and pull out the mains plug
before cleaning the drain pump!
1
0 1. First carry out emergency emptying (see section "Carrying out emer-
gency emptying").
2. Place a towel on the floor in front of the cover of the drain pump. Re-
sidual water can run out.
3. Unscrew the drain pump cover anti-
clockwise and pull it out.
4. Remove any foreign bodies from the
pump housing.
5. Replace the cover. Insert the webs on
the cover laterally into the guide slots
and screw on the cover securely clock-
wise.
6. Close the emergency emptying hose and
place it in the holder.
7. Close the flap.
30
Operating Instructions
What to do if...
Remedying faults
In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you use the Customer Service for one
of the faults listed here or to remedy an operating error, the Customer
Service technician's visit will not be free of charge, even during the
warranty period.
• If the error code C1, C2or Cdis shown in
the multi-display, you may be able to re-
medy the problem yourself (see the faults
table below).
After remedying the fault, press the button START/PAUSE. If the error
code is shown again, inform Customer Service.
• In the case of all other displayed faults (Cand number or letter code),
please inform Customer Service, quoting the error code.
Problem
Possible Cause
Remedy
The mains plug is not
plugged in.
Plug in the mains plug.
The fuse of the building's
wiring is not in order.
Replace the fuse.
The washing machine
does not work.
The filling door is not cor-
rectly closed.
Close the filling door; The
lock must engage audibly.
Press the button START/
PAUSE until the program
starts.
Button START/PAUSE not
pressed for long enough.
Cancel the child safety fea-
The child safety feature is set ture (see Section "Child
The filling door cannot
be closed.
Safety Feature“).
Error code Cdis shown
in the multi-display.
The indicators
PRE WASH, RINSE and
RINSE+ flash.
The filling door is not
correctly closed.
Close the filling door cor-
rectly. Restart the program.
31
Operating Instructions
Problem
Possible Cause
Water tap closed.
Remedy
Open the water tap.
Close the water tap. Unscrew
Filter in screw connection of the hose from the tap, re-
Water is not running.
Error code (1is shown
in the multi-display.
the intake hose blocked.
move the sieve and clean un-
der running water
Water tap is blocked with
limescale or is faulty.
Check water tap and have it
repaired if necessary.
Remove transport packaging
according to the installation
and connection instructions.
The transport packaging has
not been removed.
Adjust the feet in accordance
with the installation and
connection instructions.
The height-adjustable screw
feet are not correctly set.
The washing machine
vibrates during opera-
tion or it is on an une-
ven surface.
There is not much washing in
the drum (e.g. only one
dressing gown).
This does not impair the
function.
Check the laying of the
The water could not be com- drainage hose and eliminate
pletely pumped off before
spinning because
the bend if necessary, or
clean the drain pump and, if
The drainage hose is bent or required, remove foreign
The drain pump is blocked.
bodies from the pump hous-
ing.
The washing solution
of the main wash
froths up a lot.
Meter the detergent exactly
in accordance with the man-
ufacturer's information.
Too much detergent was
probably used.
32
Operating Instructions
Problem
Possible Cause
Remedy
The screw connection on the Tighten the intake hose
intake hose is leaky.
screw connection.
Check the drainage hose and
replace it if necessary.
The drainage hose is leaky.
The drain pump cover is not
correctly closed.
Close cover correctly.
Abort program, remove
washing from the filling
door. Restart the program.
Water runs out under
the washing machine.
Washing in caught in the
filling door.
Close the emergency drain-
age hose correctly (see the
section "Carry out emer-
gency drainage"). Call Cus-
tomer Service if the
The emergency drainage
hose is not correctly closed
or leaks.
emergency drainage hose
leaks.
Conditioner was not
washed in, compart-
ment æ for care
agents is filled with
water.
The conditioner insert in the
compartment for care agents
is not correctly attached or
is blocked.
Clean the detergent drawer,
attach the conditioner insert
securely.
Pay attention to the maxi-
mum filling quantity (see
Program tables). In the case
of easy-care textiles, select
the program EASY IRON.
Washing heavily
creased.
Too mush washing probably
put in.
Drainage hose bent.
Remove the bend.
Contact your customer serv-
ice. For pumping heights
over lm he can offer you a
conversion kit as a special
accessory.
Maximum pumping height
(discharge height 1m from
the unit's standing surface) is
exceeded.
Washing is not well
spun. Residual water is
still visible in the drum.
Error code (2is shown
in the multi-display.
Switch off the unit and pull
out the mains plug. Clean
the drain pump.
Drain pump is blocked.
If a siphon is connected: Si-
phon blocked.
Clean the siphon.
33
Operating Instructions
Problem
Possible Cause
Remedy
Wait until the DOOR indica-
tor lights up green.
Should it nevertheless be
necessary to open the main
door:
Turn the programme knob to
OFF; turn the programme
knob to PUMP OUT. Press
button START/PAUSE. The
main door can be opened af-
ter the water has been
pumped out.
The filling door is locked be-
cause of a high water level or
a high temperature. The
DOOR indicator lights red.
The main door cannot
be opened while the
appliance is turned on.
If water can be seen through
the window in the door, first
carry out emergency empty-
ing (see section “Carrying out
Emergency Emptying Opera-
tion").
After approx. 4 to 5 minutes
the door can be opened
again by pulling the handle.
Power failure!
(All indicators have gone
off.)
For safety reasons the door
remains locked for 4 to
5 minutes.
Water tap not fully opened. Open the water tap fully.
Remnants of detergent
are building up in the
detergent drawer.
Filter in the screw connec-
tion of the intake hose on
the water tap or on the unit tap and from the unit and
Close the water tap. Unscrew
the inlet hose from the water
is blocked.
clean the filter.
The cause is probably a de-
tergent with a high silicate
content.
No negative influence on the
rinsing result. Use liquid de-
tergent if necessary.
The rinsing water is
murky.
The corresponding in-
dicator does not light The selected additional pro-
up when one of the ad- gram cannot be combined
ditional program but- with the set program.
tons is pressed.
Make another selection.
34
Operating Instructions
If the washing results are not satisfactory
If the washing has turned grey and if limescale is deposited in the
drum, then
• Too little detergent was used.
• The wrong detergent was used.
• Special soiling was not pre-treated.
• Program or temperature not set correctly.
• If multi-component detergents are used, the individual components
were not used in the correct ratio.
If there are still grey spots on the washing,
• Washing soiled with ointments, grease or oils was washed with too
little detergent.
• Too lower temperature was used for washing.
• A frequent cause is that softener - particularly that in concentrated
form - has reached the washing. Wash out such spots quickly and use
the softener concerned carefully.
If at the end of the last rinse foam is still visible
• Modern detergents can also cause foam in the last rinse. However,
the washing is still sufficiently rinsed.
If there are white remnants on the washing
• These are insoluble components of modern detergents. They are not
the result of an insufficient rinsing effect.
Shake or brush out the washing. In future, perhaps you should turn
the washing inside out before washing it. Examine your choice of de-
tergent and if necessary use liquid detergent.
35
Operating Instructions
Carrying out emergency drainage
• If the washing machine no longer pumps off the washing solution,
emergency drainage must be performed.
• If the washing machine is in a room where there is a risk of frost,
emergency drainage must be performed if there is a possibility of
frost.
In addition: unscrew the inlet hose form the water tap and place it on
the floor. Empty the drainage hose.
Warning! Switch off the washing machine before performing emer-
gency drainage and pull out the mains plug.
1
Caution! The washing solution escaping from the emergency drainage
hose may be hot. There is a risk of scalding! Allow the washing solution
to cool down before performing emergency drainage.
0 1. Place a flat collecting vessel in order to collect the washing solution
which is draining off.
2. Fold open the flap in the right section
of the base outwards and pull it off.
3. Remove the emergency drainage hose
from its holder.
4. Place the collecting vessel under the
hose.
5. Detach the plug of the emergency
drainage hose by turning it anticlock-
wise and pull it out.
The washing solution runs out. Depend-
ing on the amount of solution, it may
be necessary to empty the collecting
vessel several times. To do this, close the
emergency drainage hose temporarily
with the plug.
36
Operating Instructions
When the water is completely drained:
6. Push the plug securely into the emergency drainage hose and turn it
clockwise to secure it.
7. Replace the emergency drainage hose in its holder.
8. Put on the flap and close.
37
Operating Instructions
Additional rinsing cycle (RINSE+)
The washing machine is set for extremely economical water consump-
tion. However, for persons who suffer from allergies, it can be helpful
to rinse with more water.
If this function is set, an additional rinsing cycle is run with the pro-
grams COTTONS/LINEN, EASY CARES/EASY IRON and DELICATES.
No additional rinse is set when the unit is delivered.
3
Set additional rinse:
0 1. Turn program selector to SHORT SPIN.
2. Keep the button SOAKING pressed for at least 5 seconds.
After the button has been pressed for 5 seconds, RINSE+ flashes on the
program sequence display for 5 seconds.
3. While RINSE+ is flashing, release the button SOAKING.
After the flashing stops, the additional rinse cycle is set. It is active un-
til it is cancelled again.
If an additional rinse cycle is set, the display RINSE+ lights up on the
program sequence display before the program start and during the ad-
ditional rinse cycle.
4. If you wish to check whether the additional rinse function is enabled:
– Turn program selector to SHORT SPIN.
– Briefly press the button SOAKING.
The additional rinse cycle is set when RINSE+ flashes on the program
sequence display.
Cancel additional rinse:
0 1. Turn program selector to SHORT SPIN.
2. Keep the button SOAKING pressed for at least 5 seconds.
RINSE+ flashes on the program sequence display as soon as the button
is pressed. After 5 seconds, RINSE+ stops flashing and lights up con-
stantly for a further 5 seconds.
3. While RINSE+ lights up constantly, release the button SOAKING.
After RINSE+ has stopped lighting up, the additional rinse cycle is can-
celled.
An additional rinse cycle increases water consumption and the program
duration.
3
38
Operating Instructions
Child Safety Feature
If the child safety feature is set,
the filling door can no longer be
closed and no washing program
can be started.
Setting the child safety feature
0
Use a coin to turn the rotary knob
on the inside of the filling door
clockwise as far as it will go.
Warning! The rotary knob must
not be in a vertical position after
adjustment, otherwise the child
safety feature is not active. The ro-
tary knob must project as shown in
the diagram
1
Cancelling the child safety
feature
0
Turn the rotary knob anticlockwise
as far as it will go.
39
Installation and connection instructions
Installation and connection instructions
Installation Safety Precautions
• Do not tilt the washing machine onto its front or onto its right side
(viewed from the front). Electronic components can get wet.
• Check the washing machine for transport damages. A damaged unit
must never be put into operation under any circumstances. In the
event of damage, please contact your supplier.
• Ensure that all parts of the transport safeguard are removed and that
the unit is splash protected, see "Removing transport safeguard".
Otherwise, the units or neighbouring furniture can be damaged when
spinning.
• Always insert the plug into a correctly installed earthed socket.
• In the case of permanent connection: A permanent connection may
only be made by an authorised specialist.
• Before putting the machine into operation, ensure that the mains
voltage and current type shown on the unit's rating plate correspond
with those at the place where the machine is being installed. The fuse
rating is also found on the rating plate.
• The mains lead may only be replaced by the customer service or by an
authorised electrician.
40
Installation and connection instructions
Installation of the appliance
Washing machines with curved panels are not suitable for installing
under units.
3
Transporting the appliance
• Do not place the washing machine on its front or on its right side
(viewed from the front). Otherwise, electrical components can get
wet.
• Never transport the unit without the transport safeguard. Do not re-
move the transport safeguard until the appliance is at the installation
location. Transporting the unit without the transport safeguard can
damage it.
• Lift the appliance neither by an open filling door nor by the base.
• When transporting the unit with a sack trolley: Attach the sack trol-
ley only at the side.
Remove transportation protection
Important! It is essential to re-
move the transport safeguard be-
fore putting the unit into
operation. Keep all parts of the
transport safeguard in a safe
place for possible later transport
(moving).
0 1. Open both hose holders on the
unit's rear side and remove the
hoses and mains cable.
2. Pull both hose holders off the
unit with a strong pull.
41
Installation and connection instructions
The special key E and the caps D
(2 each) and G (1 each) are sup-
plied with it.
3
3. Unscrew the two screws with the
special spanner.
4. Unscrew the 4 screws B with spe-
cial spanner E.
5. Remove the transport rail C.
6. Screw the 4 screws B back in.
7. Close the 2 large holes with the
caps D.
Important! Press in the caps with
sufficient strength so that they
engage in the rear panel (protects
the inside of the units against
splash water).
8. Remove the screw F, including the
sleeve, compression spring and
washer, with the special spanner
E.
9. Close the hole with the cap G.
Important! Press in the cap with
sufficient strength so that it en-
gages in the rear panel (protects
the inside of the unit against splash water).
42
Installation and connection instructions
Prepare the installation place
• The installation surface must be clean and dry, free of floor polish
residues and other greasy coatings so that the unit does not slip
away. Do not use lubricants as a sliding aid.
• Installation on a high-veil carpet or floor tiles with soft sponge backs
is not recommended because the standing safety of the appliance is
then no longer ensured.
• By installation surfaces with small-format tiles, lay a conventional
rubber mat underneath.
• Minor unevenness of the floor surface should never be levelled out by
laying pieces of wood, card or similar materials, but rather should al-
ways be compensated for by adjusting the screw feet.
• If, for space reasons, it is not possible to avoid setting up the unit di-
rectly next to a gas or coal-fired cooker: install a thermal insulation
panel between the cooker and washing machine (85 x 57cm) which
must have an aluminium film on the side against the cooker.
• The washing machine must not be set up in a room where there is a
danger of frost. Frost hazard!
• Flexible feed and drain tubings may not be crinkled or squeezed.
Installation on a concrete base
If the unit is set up on a concrete base,
for safety reasons it is essential to fit
stand plates in which the washing ma-
chine is adjusted. The stand plates are
available from Customer Service under
the spare parts number 645 425 058.
Installation on vibrating floors
Where the floor vibrates, particularly in the case of wooden beam
floors with pliable boards, securely screw a water-resistant wooden
panel at least 15mm thick onto at least 2 floor planks. If possible, set up
the unit in the corner of a room, as the wooden floor is optimally re-
strained there and is therefore least likely to be subject to resonance vi-
brations.
43
Installation and connection instructions
Compensate for floor unevenness
Floor unevenness can be compensated for and the height can be cor-
rected with the four adjustable screw feet. The height can be adjusted
in the range +10 .. -5mm.
To adjust the feet use the special spanner supplied for removing the
transport braces.
0 1. Slide the special key firmly onto
the hexagon head of the threa-
ded foot as far as it will go.
2. Adjust the screw feet so that the
unit is horizontal and stable. The
unit must not wobble over when
loaded.
3. If necessary, check the setting
with a spirit level.
Important! Minor unevenness of
the floor surface should never be
levelled out by laying pieces of
wood, card or similar materials,
but rather should always be com-
pensated for by adjusting the adjustable feet.
44
Installation and connection instructions
Electrical connection
Details of the mains voltage, current
type and required fuses can be
found on the rating plate. The ra-
ting plate is located at the top
above the filling door.
For permanent electrical connection
within the electrical circuit, provi-
sions must be made which allow for electrical disconnection of the ap-
pliance from the mains with a contact opening of at least 3 mm at all
poles. Suitable devices include circuit breakers, fuses (threaded fuses
must be entirely removed from the socket), ground fault circuit inter-
rupters and contactors. Permanent connection may only be carried out
by an authorised electrician.
This appliance complies with the following EC directives:
– The "Low Voltage Directive" 72/23/EU with changes
– The "EMC Directive" 89/336/EU with changes
;
Water connection
The washing machine has safety features which prevent back-contami-
3
nation of the drinking water and which conform to the national regu-
lations of the water authorities (e.g. for Germany: DVGW guidelines).
This means that additional protective measures in the installation are
not necessary.
Important!
– Units for connecting to cold water must not be connected to hot wa-
ter.
– Use only new hose sets for the connection.
Permissible water pressure
The water pressure must be at least 1 bar (= 10 N/cm2 = 0.1 Mpa), max-
imum 10 bar = 100 N/cm2 = 1 Mpa).
• If more than 10 bar: Connect a pressure-reduction valve upstream.
• If less than 1 bar: Unscrew the inlet hose on the unit side at the sole-
noid intake valve and remove the flow regulator (to do this, remove
the filter with pointed pliers and take out the rubber washer behind).
Replace the filter.
45
Installation and connection instructions
Water inflow
A pressure hose of 1.35m in length is supplied.
If a longer inflow hose is required, only a VDE-approved, complete set
of hoses with fitted hose screw connections offered by our Customer
Service is permissible.
– Hose sets in lengths of 2.2m, 3.5m and 5m are available for washing
machines without Aqua-Control.
– Hose sets in lengths of 2.0m, 2.9m and 3.5m are available for washing
machines with Aqua-Control.
Important! Never cut into pieces in order to extend the hoses!
Sealing rings are supplied either in the plastic
nuts of the hose screw connection or in the enc-
losed pack. Do not use other seals!
3
0 1. Connect the hose with the angled connection to
the machine.
Important!
– Do not lay the inlet hose verti-
cally downwards, instead run it
to the right or left as shown in
the diagram.
– Tighten the hose screw connec-
tion only by hand.
2. Connect the hose with the
straight connection to a water valve with a
screw thread R 3/4 (inches).
Important! Only tighten the screw connection
manually.
3. By slowly opening the water valve before
putting the washing machine into operation,
check that the connection is free of leaks.
46
Installation and connection instructions
Water drain
The drainage hose can either be connected to a siphon or hung in a
wash basin or discharge basin or a bath tub.
Only original hoses may be used for extensions (max. 3m laid on the
floor and then up to 80cm high). Customer Service stocks drainage
hoses in lengths of 2.7 and 4m.
Important! It is essential to lay the drainage hose without kinks.
Water drain-off inside a siphon
The grommet on the hose end fits all
standard siphon types.
0
Secure the connection between the
grommet and siphon with a hose clamp.
Water drain-off inside a basin
Important!
– Small basins are not suitable for
drainage. Water could overflow!
– The end of the drainage hose must not
be submerged in the pumped-out wa-
ter. Otherwise, the water could be
sucked back into the unit.
– When hanging in a wash basin or a
bath tub, the drainage hose must be
secured with the supplied attachable
bend to prevent it slipping. The back-
surge force of the escaping water
could otherwise force the hose out of
the basin.
0
Tie the bend to the tap or the wall using
a piece of string.
47
Installation and connection instructions
Delivery heads over 1m
To pump off the washing / rinsing solution, every washing machine has
a drain pump which carries liquids up to a height of 1m via the drain-
age hose, calculated from the machine's standing surface.
Please contact Customer Service for delivery heads of over 1m.
Technical data
Adjustment possibility
Filling quantity (program-dependent)
Area of use
Approx. +10 / -5mm
max. 5kg
Domestic
Drum speed, spinning
Water pressure
See rating plate
1-10 bar (= 10 - 100 N/cm2
= 0.1 - 1.0 Mpa)
Dimensions
(dimensions in mm)
48
Warranty conditions / Customer service centres
Warranty conditions / Customer service
centres
Weitere Kundendienststellen im Ausland
In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können
dort eingesehen werden.
Further after-sales service agencies overseas
In these countries our AEG agents’ own guarantee conditions are applicable. Please ob-
tain further details direct.
Autres agences étrangères assurant le service après-vente
Dans ces pays, les conditions de garantie des concessionnaires de la région sont vala-
bles. Vous pouvez les consulter sur place.
Otros puntos de Postventa en el extranjero
En estos países rigen las condiciones de nuestros representantes locales. las cuales
pueden ser consultadas allí mismo.
Ulteriori uffici del servizio tecnico assistenza clienti all’estero
In questi paesi sono valide le condizioni di garanzia dei partner locali. Queste condizioni
possono essere esaminante sul luogo.
Serviços de assistência técnica no estrangeiro
Nestes países são válidas as condições de garantia dos concessionários locais, podendo
aí ser consultadas.
U.A.E. Abu Dhabi
Universal Trading Company Jordan Household
Jordan
Malta
ITC
P.O. Box 43 99
Tel.: 335331
Supply Co. Ltd.
P.O. Box 3/68
International Trading Com-
pany
Amman/Tel.: 69 70 50
White House Building
Mountbatte Street
Blata L-Bajda/Tel.: 220644
Egypt
Kanada
EURO-LINE Appliances
Mauritius
Happy World Centre Ltd.
Middle East Commercial
Center
2150 Winston PARK Drive 20 P.O. 7 54
P.O. Box 19
Kairo-Heliopolis
Tel.: 29917/31634
Oakville, Ontario L6H 5V1
Tel.: 905 829 3980
Fax: 905 829 3985
1 Chausee Street
Port Louis
Tel.: 25355
Australia
Korea (South)
Core Incorp.
3/F Chewoo Bldg.
200 Nonhyun-Dong
Kangnam-Ku
Namibia
ANDI-Co Pty. Ltd
9 Kingston Town Close
Oakleigh VIC 3166
Tel.: (03) 9569 1235
Fax: (03) 9569 1450
AEG NAMIBIA (PTY) LIM-
ITED-Jeppe Street
Northern Industrial Area
Windhoek
Tel.: (061) 21-6082/4
Fax: (061) 217838
Seoul
Telefon 82 2 549 89 61
49
Warranty conditions / Customer service centres
Bahrain/Arabian Gulf
A.A. Zayani & Sons
P.O. Box 9 32
Croatia
Electrolux D.O.O.
Suplova 7
New Zealand
Euro-Life New Zealand Ltd.
Privat Bag
Bahrain
Tel.: 261060
10000 Zagreb
Tel.: 1 61 19512
Fax: 1 61 19513
58 Symonds Street
Auckland
Tel.: (09) 525 2222
Bulgaria
Kuwait/Arabian Gulf
Nouvelle Caledonie
Socometra N.C.
B.P. 483
Nouman
Tel.: 275444
Electrolux Bulgaria E.O.O.D. Ali Al-Ghanim Est.
91 Levski Blvd.
1000 Sofia
Tel.: 2 806676
Fax. 2 980 5276
P.O. Box 10 83
Tel.: 5322463
Fax: 5242114
Cyprus
Hadjikyrlakos & Sons Ltd.
Prodromou 121
P.O. Box 21587
Lebanon
Oman
Adib & Assaferi
P.O. Box 539
Tripoli
Moshin Haider Darwish
P.O. Box 1 35
Muscat
Nicosia 1511
Tel.: 703743
Service Telephones:
Nicosia 02 481226
Limassol 05 562182
Larnaca 04 633929
Paphos 06 932 699
Estonia
Electrolux Estonia Ltd.
Mustamäe tee 24
EE0006 Tallinn
Latavia
Poland
Electrolux Latavia Ltd.
Terlaton Street 42/44
1011 Riga
Tel.: 371 2 297821
Fax: 371 2 821286
Electrolux Poland Sp. zo.o.
ul. Domaniewska 41
02-034 Warszawa
tel.: 022 874 33 33
fax: 022 874 33 00
Tel.: (372) 6 650 090
Fax: (372) 6 650 092
Hongkong
Lthuania
Electrolux Lthuania
Verkui 29
2600 Vilnus
Tel.: 372 272 3326
Fax: 372 272 3366
Russia
Wo Kee Services Ltd.
585-609 Castle Peak Road
Kwai Chung N.T.
Hongkong
Electrolux Russia Ltd.
16 Olympiysky prospekt
129090 Moscow
Tel.: (095) 937 7837
Fax: (095) 926 5513
Tel.: 2494 4000
50
Warranty conditions / Customer service centres
Israel
Malaysia
Saudi Arabia
Alia Trading Corporation
P.O. Box 4101
King Abdul Aziz Street
Riyadh
Tel.: 4645977
Al Nahas Est.
Musaidia Market I
P.O. Box 1 15 29
Jeddah
Electricity & Electronic
Services-Evis LTD.
19 Hataasia st.
Arzbergh Engineering
No. 49A/B, Jalan Petaling
Utama 7
4600 Petaling Jaya
Tel.: 3 795 1084
Raanana,
Industrial area 43654
Tel: 972-9-7448118
Fax: 972-9-7603618
e-mail:[email protected]
Fax: 3 795 1082
Tel.: 6606852
Japan
Electrolux Japan Ltd.
Singapore
Arzbergh Engineering
Slovenia
Electrolux Slovenia D.O.O.
Yasuda Warehouse 4F 3-3-12 19 Tanglin Road 06-07
Traska Ul. 132
Heiwajima Ota-Ku
Tokyo
Tel.: 81 3 3544 3363
Fax: 81 3 3763 6143
Singapore 247909
Tel.: 65 7356572
Fax: 7351124
1000 Ljubljana
Tel.: 61 1234 137
Fax: 61 1234 238
Thailand
Slovakia Rep.
Electrolux Slovakia S.R.O.
Seberiniho 1
821 03 Bratislava
Tel.: 7 4333 9745
Fax: 7 4333 6976
South Africa
AEG (Pty) Ltd.
55, 12th Road
P.O. Box 1 02 64
Kew/Johannesburg 2000
Tel.: 8069111
OLYMPIA Thai Ltd.
44 Ratchadapisek Road
10320 Bangkok
Tel.: 2 513 6111
Fax: 2 513 2574
Hungary
Electrolux Lehel KFT
(AEG Div)
Erzsebet’Kiralyne Utja 87
1142 Budapest
USA
Syria
ANDI Co. Appl. Inc. East
65 Campus Plaza
Edison, New Jersey 0837
USA/Tel.: (201) 2258839
Masri & Shami
P.O. Box 24 96
Damascus
Tel.: 214080
Tel.: 00361/251 84 44
51
52
53
Index
Index
A
Q
Abort program . . . . . . . . . . . . . . . . . . . . . . . 24
Additional rinse . . . . . . . . . . . . . . . . . . . . . . 38
Quick wash . . . . . . . . . . . . . . . . . . 12, 19, 26
R
C
Rating plate . . . . . . . . . . . . . . . . . . .9, 45, 55
Rinse + . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Rinse hold . . . . . . . . . . . . . . . . . . . 11, 20, 25
Risk of frost . . . . . . . . . . . . . . . . . . . . . . 6, 36
Run time . . . . . . . . . . . . . . . . . . . . . . . . 13, 24
Care agent . . . . . . . . . . . . . . . . 9, 17, 18, 22
Child safety feature . . . . . . . . . . . . . . .31, 39
Conditioner . . . . . . . . . . . . . . . 9, 11, 22, 27
Cottons . . . . . . . . . . . . . . . . . . 10, 16, 26, 27
Curtains . . . . . . . . . . . . . . . . . . . . . . . . .15, 26
Customer Service . . . . . . . . . 14, 29, 31, 55
S
Silk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 16
Soaking . . . . . . . . . . . . . . 12, 19, 20, 22, 26
Soaking agent . . . . . . . . . . . . . . . . . . . . . . . .22
Spin . . . . . . . . . . . . . . . . . . . . . 11, 20, 24, 27
Stain . . . . . . . . . . . . . . . 8, 9, 12, 19, 26, 35
Starching . . . . . . . . . . . . . . . . . . . . . . . . 11, 27
D
Delay timer . . . . . . . . . . . . . . 10, 12, 20, 23
Delicates . . . . . . . . . . . . . . . . . . . . . 11, 16, 26
Detergent . . . . . . . . . . . . . . . . . . . . . 9, 17, 22
Detergent drawer . . . . . . . . . . . . . . . . . .9, 22
Door opening . . . . . . . . . . . . . . . . . 21, 25, 34
Drain pump . . . . . . . . . . . . . . . . . . . . . . .9, 30
U
Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
E
W
Easy iron . . . . . . . . . . . . . . . . . 11, 16, 26, 33
Easy-cares . . . . . . . . . . . . . . . . . . . 11, 16, 26
Emergency drainage . . . . . . . . . . . . . . . . . . 36
Energy saving . . . . . . . . . . . . . . . . . . . .10, 26
Warranty . . . . . . . . . . . . . . . . . . . . . .6, 31, 49
Washing
coloureds . . . . . . . . . . . . . . . . . . . . . . . . .15
sensitive . . . . . . . . . . . . . . . . . . . . . . . . . .16
slightly dirty . . . . . . . . . . . . . . . . . . . . 8, 12
Washing powder . . . . . . . . . . . . . . .9, 17, 18
Water
hardness . . . . . . . . . . . . . . . . . . . . . . . 8, 17
pump off . . . . . . . . . . . . . . . . . . . . . . 11, 25
softener . . . . . . . . . . . . . . . . . . 8, 9, 17, 22
Woollens . . . . . . . . . . . . . . . . . 11, 16, 26, 27
hand-washable . . . . . . . . . . . . . . . . . 11, 26
F
Filling quantity . . . . . . . . . . . . . . . . . . .13, 26
G
Gentle rinse . . . . . . . . . . . . . . . . . . . . . .11, 27
H
Handwash . . . . . . . . . . . . . . . . . . . 11, 26, 27
I
In-wash stain treatment . . . . . . . . . . . .9, 22
L
Linen . . . . . . . . . . . . . . . . . . . . 10, 16, 26, 27
M
Multi-display . . . . . . . . . .10, 23, 24, 31, 55
O
Over-dosed . . . . . . . . . . . . . . . . . . . . . . . . . 25
P
Pre wash . . . . . . . . . . . . . . . . . 12, 19, 22, 26
Pre-wash detergent . . . . . . . . . . . . . . . .9, 22
Program sequence display . . . . . . . . . .10, 24
Pump out . . . . . . . . . . . . . . . . . . . . . . . .11, 25
54
Service
Service
In the chapter "What to do if...“ , some faults are listed which you can
remedy yourself. Look there first if a fault occurs. If you do not find any
information there, please consult your Customer Service. (You can find
the addresses and telephone numbers in the section "Customer Service
Centres“.)
Always prepare in advance for the discussion. By doing so you will sim-
plify the diagnosis and the decision on whether customer service is
necessary.
Note the PNC number and S. num-
ber. You will find both on the rating
plate on the inside of the door of
your washing machine.
PNC .....................................................
S. No. .....................................................
Answer as precisely as possible:
• What form does the fault take?
• Under what circumstances does the fault occur?
• Does the multi display show an error message?
When do you incur costs even during the warranty period?
– If you could have remedied the fault yourself with the aid of the fault
table (see the section "What to do if..."),
– If several journeys by the customer service technician are necessary
because for example he did not receive all the important information
before his visit and must collect spare parts. These multiple trips can
be avoided if you prepare your phone call as described above.
55
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
© Copyright by AEG
822 942 926-01-110901-01
Subject to change without notice
|