LAVAMAT L 60895 - 62895
La lavadora ecológica
The environmentally friendly washing machine
Instrucciones para el uso
Instruction booklet
62895
PRELAVADO/
LAVADO
OFF
CENTRIF
.
DELICADO
RESISTENTES
COLOR
1200
900
600
ACLARADO
ACLARADO
CENTRIFUGAR
FIN
CENTRIFUGAR
DESAGUAR
90
90E
60E
40E
PROG.
CORTO SELECCION
PRE-
SUAVIZANTES
TIEMPO
STOP
ACLARADOS
ACLARAD.
DELICADOS
40
30
FRIO
30
FRIO
60
50
LANA
SOBRE DOSIF.
PRE-
START
40
SINT.-
MEZCLA
LAVADO DELICADOS PAUSA
FRIO
30
40
40
FRIO
40
FÁCIL
DELICADO
PUERTA
PERFEKT IN FORM UND FUNKTION
Contents
Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-49
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Tips for environmental protection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Main features of your washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Description of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Programme selector dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
START/PAUSE (START/PAUSA) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
DELAY START (PRESELECCIÓN) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Programme Option buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
PREWASH (PRELAVADO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
SENSITIVE (DELICADOS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
QUICK WASH (PROGRAMA CORTO). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
SPIN SPEED (CENTRIFUGADO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
RINSE HOLD (STOP ACLARADO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Display (TIEMPO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Programme progress display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Cancelling a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Altering a programme which is running. . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Altering an option which is running. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Opening the door after the programme has started. . . . . . . . . . . . . . . . . 57
Detergent dispenser drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Before the first wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Preparing the wash cycle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Sorting out and preparing the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Weight of laundry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Types of fabric and care labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-61
Detergents and additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Which detergent and additive? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
How much detergent?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Liquid detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Adding a water softener (descaling product) . . . . . . . . . . . . . . . . . . . . . . . . . 62
Information on water hardness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
45
Contents
How to wash
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Load the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Add detergent and additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Select the desired wash programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Select the desired options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Select the SPIN SPEED or RINSE HOLD option . . . . . . . . . . . . . . . . . . . . . . . . 64
Select the EXTRA RINSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Select the DELAY START option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Starting the programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Programme progress display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
At the end of the programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Programme charts: wash and special programmes . . . . . . . . . . . . . . . 68-70
Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
After each wash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Periodical cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Door seal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Drain pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Emergency emptying out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Frost precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Something not working? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-77
Unsatisfactory washing results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Instructions for installation and electrical connection. . . . . . . . . . . . . . . 81
Safety instructions for the installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
46
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82-83
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Levelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Water drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Permanent connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
47
Safety instructions
Safety instructions
The safety of AEG/ELECTROLUX appliances complies with the industry
standards and with legal requirements on the safety of appliances.
However, as manufacturers, we feel it is our duty to provide the fol-
lowing safety notes.
General safety
• Repairs to the machine must be carried out only by qualified person-
nel. Repairs carried out by inexperienced persons could cause serious
danger. Contact your local AEG/ELECTROLUX Service Force Centre.
• Never start the machine if the electrical supply cable is damaged or
the control panel or worktop are so damaged that inner components
can be reached.
• Unplug the appliance before carrying out any cleaning or mainte-
nance operations.
• Never pull the power supply cable to remove the plug from the sock-
et; always take hold of the plug itself.
• Never spray the machine with a jet of water. Danger of electric shock!
• During high temperature wash programmes the door glass may get
hot. Do not touch it!
• Let the water cool down before carrying out emergency emptying or
before opening the door in an emergency.
• Small animals can gnaw electric wires and water hoses causing elec-
trocution hazard and damage due to water leaks.
Positioning, connection, starting up
• Follow the instructions for positioning and connection.
• Carry out a first wash without laundry (COTTONS 90, with half the
amount of detergent) in order to remove any manufacturing residue
from the tub and the drum.
• Should the machine be purchased in winter, when temperatures can
be below 0°, leave the appliance for 24 hours at ambient temperature
before starting it.
48
Child safety
• Children are often not aware of how dangerous electrical appliances
can be. When the machine is working, children should be carefully
supervised and not be allowed to play with the appliance - there is a
risk that they could become trapped inside.
• The packaging components (e.g. plastic film, polystyrene) can be dan-
gerous to children - danger of suffocation! Keep them out of chil-
dren’s reach.
• Keep all detergents in a safe place out of children’s reach.
• Make sure that children or pets do not climb into the drum.
• When the appliance is to be scrapped, cut off the electrical supply
cable and destroy the plug with the remaining cable. Disable the door
catch in order to prevent children from becoming trapped inside
while playing.
Proper use
• This appliance is designed for domestic use only. If the machine is
used for any other purposes or is not used correctly, the manufactur-
er accepts no responsibility for any damage that might occur.
• For safety reasons, the appliance must not be modified.
• Use only detergents suitable for washing machines and follow the
manufacturer’s instructions.
• Garments which have been in contact with flammable solvents
should not be machine washed.
• Do not use your machine for dry cleaning.
• Dyes and bleaching agents may only be used if specifically permitted
by the manufacturer of these products. We cannot be held responsi-
ble for any damage.
• Always unplug the appliance and turn off the water tap after use.
49
Disposal
Packaging materials
The materials marked with the symbol
>PE<=polyethylene
are recyclable.
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of them properly in
appropriate collection containers.
Machine
Use authorised disposal sites for your old appliance. Help to keep your
country tidy!
The symbol
on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall be handed
over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of
this product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Tips for environmental protection
To save water, energy and to help protect the environment, we recommend
that you follow these tips:
• Normally soiled laundry may be washed without prewashing or soak
in order to save detergent, water and time (the environment is pro-
tected too!).
• Use the energy saving programme when washing normally soiled garments.
• The machine works more economically if it is fully loaded.
• When small loads are washed, use only half to two thirds of the rec-
ommended amount of detergent.
• With adequate pre-treatment, stains and limited soiling can be
removed; the laundry can then be washed at a lower temperature.
50
• If the water has a medium or high degree of hardness (starting from
hardness degree II, see “Detergents and additives”) water softeners
must be added.
The amount of detergent can then be adjusted to hardness degree I (= soft).
Main features of your washing machine
• Programme and temperature setting using the programme selector.
• Energy saving programmes (90E), (60E), (40E) for normally soiled
cotton items.
• Speed for the final spin can be reduced to 900, 600 rpm for L62895
and 800, 600 rpm for L60895.
• RINSE HOLD: the laundry is left immersed in the final rinse water to
prevent creasing.
• Delay Start: programme start can be delayed up to 23 hours (e.g. to
times with a more economical power rate).
• Programme progress display showing the programme steps selected
and the programme phase which is running.
• Because of its gentle washing action, the special wool cycle washes
your garments with extreme care.
• 3-compartment drawer for detergent and fabric softener.
• Balance control device: to prevent vibration during spinning.
• The ECO valve allows total use of detergent and reduces water con-
sumption so saving energy.
51
Description of the appliance
Description of the appliance
Front view
Detergent drawer
Control panel
62895
PRELAVADO/
LAVADO
OFF
CENTRIF
.
DELICADO
RESISTENTES
COLOR
1200
900
600
ACLARADO
CENTRIFUGAR
DESAGUAR
90
90E
60E
40E
ACLARADO
CENTRIFUGAR
FIN
PROG.
CORTO SELECCION
PRE-
SUAVIZANTES
TIEMPO
STOP
ACLARADOS
ACLARAD.
DELICADOS
40
30
FRIO
30
FRIO
60
50
LANA
40
SOBRE DOSIF.
PRE-
START
SINT
.-
MEZCLA
LAVADO DELICADOS PAUSA
FRIO
30
40
40
FRIO
40
FÁCIL
DELICADO
PUERTA
Door
Drain pump
Adjustable feet
52
Description of the appliance
Control panel
F
G
D E
62895
PRELAVADO/
LAVADO
OFF
RESISTENTES
COLOR
. DELICADO
CENTRIF
CENTRIFUGAR
DESAGUAR
1200
900
ACLARADO
ACLARADO
CENTRIFUGAR
FIN
90
90E
60E
40E
40
30
PROG.
CORTO SELECCION
PRE-
SUAVIZANTES
600
TIEMPO
ACLARADOS
STOP
DELICADOS
ACLARAD.
FRIO
30
40
FRIO
60
50
LANA
SOBRE DOSIF.
PRE-
START
.-
SINT
MEZCLA
LAVADO DELICADOS PAUSA
FRIO
30
40
40
FRIO
40
FÁCIL
DELICADO
PUERTA
A
B
C
H
I
A = PREWASH button
C = START/PAUSE button
E = QUICK WASH button
F = DELAY START button
G = Display
B = SENSITIVE button
D = SPIN SPEED button
H = Programme progress display
I = Programme selector dial
Programme selector dial
The programme selector determines the type of washing cycle (e.g. water
level, drum movement, number of rinses) and the washing temperature
according to the type of laundry.
The selector dial is divided into 5 sections:
• Cottons (RESISTENTES COLOR)
• Synthetics (SINT.-MEZCLA)
• Delicates (DELICADO)
62895
OFF
RESISTENTES
COLOR
. DELICADO
CENTRIF
CENTRIFUGAR
DESAGUAR
90
90E
60E
40E
VIZANTES
SUA
ACLARADOS
• Woollens (LANA)
ing)
(hand wash-
DELICADOS
40
30
FRIO
30
40
FRIO
60
50
LANA
• Special programmes
• Reset programme O/OFF
.-
SINT
MEZCLA
FRIO
40
30
40
FRIO
40
FÁCIL
DELICADO
The selector dial can be turned either clockwise or anticlockwise.
Position 90E, 60E and 40E (economy) corresponds to the ENERGY
SAVING programme for normally soiled laundry, extended washing
time. They cannot be combined with QUICK WASH (PROG. CORTO)
option.
53
Description of the appliance
)
Position EASY TO IRON at 40°C (FÁCIL
In this position the laundry is gently washed and spun to avoid any
creasing. In this way ironing is easier.
Position FRIO = cold wash
START/PAUSE button (START/PAUSA)
This button has two functions:
a) Start
After having selected the required programme, press this button to start
the machine. If you have selected the DELAY START option (PRESELEC-
CIÓN), the machine starts its hourly countdown.
b) Pause
To interrupt a programme which is running, press the START/PAUSE
button: the relevant light starts to flash.
To restart the programme from the point at which it was interrupted,
press the START/PAUSE button again.
DELAY START button (PRESELECCIÓN)
The wash programme can be delayed from 30 min – 60 min – 90 min,
2 hours and then by 1 hour up to a maximum of 23 hours by means of
this button.
Selecting the delayed start
• Select the programme and the required options.
• Select the delay start.
• Depress START/PAUSE button: the machine starts its hourly count
down.
The programme will start after the selected delay has expired.
Cancelling the delayed start
• Depress START/PAUSE button.
• Depress DELAY START button until the the symbol 0’ is displayed.
• Depress START/PAUSE button again to restart the machine
.
• To modify the delay time, after the programme has already started,
set the programme again and select the new desired delay time.
54
Description of the appliance
Programme Option buttons
Depending on the programme, different functions can be combined.
These must be selected after choosing the desired programme and
before depressing the START/PAUSE button.
When these buttons are pressed, the corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.
PREWASH (PRELAVADO)
The machine performs a prewash cycle before the main wash. The pre-
wash cycle ends with a short spin in programmes for Cotton and Syn-
thetics, and with emptying of the water without spinning for Delicates.
To be used for heavily soiled laundry.
SENSITIVE (DELICADOS)
If you depress this button, the washing machine adds one rinse in COT-
TONS and SYNTHETIC programmes and reduces the spinning of the
drum and the washing intensity. To be uses for delicate color or lightly
soiled cottons.
This option connot be selected with the EASY IRON programme.
QUICK WASH (PROG. CORTO)
By pressing this button the washing time is reduced. For use when
washing lightly soiled laundry.
This option is not available with programme wool, handwash and
economy programmes.
Important: By depressing at the same time buttons SPIN SPEED and
QUICK WASH, the acoustic signal is suppressed when selecting the pro-
grammes, in case of incorrect option selection and at the end of the cycle.
SPIN SPEED (CENTRIFUGADO)
Press this button to reduce the maximum speed of the
final speed proposed by the machine for the selected pro-
gramme or to select option RINSE HOLD.
The maximum spin speed for cotton is:
- 1200 rpm for L62895
1200
900
600
STOP
ACLARAD.
- 1000 rpm for L60895.
For synthetics, wool and delicates is 1000 rpm for
L60895 and 900 rpm for L62895.
Important: By depressing at the same time buttons SPIN SPEED and
DELAY START the machine will perform an extra rinse (see page 65).
55
Description of the appliance
RINSE HOLD (STOP ACLARADO)
By selecting this option, the last rinse water is not emptied out, to
prevent the fabrics from creasing. When the programme has finished,
the START/PAUSE button goes off, the END pilot light (FIN) on the pro-
gramme progress display illuminates, the DOOR light (PUERTA) is red and
the display shows a static zero to indicate that the water must be emp-
tied out.
To empty out water there are two possibilities:
• Select programme “DESAGUAR” (draining):
The water is emptied out without spinning.
• Select programme “CENTRIFUGAR” (SPIN) or “CENTRIF. DELICADO”
(DELICATE SPIN). Select the spin speed by means of the relevant button
and then depress the START/PAUSE button. The water is emptied out
and the laundry is spun at the selected spin speed.
Warning! The programme selector dial must be turned first to RESET
O and then to the DRAIN programme “DESAGUAR” or “CENTRIFU-
GAR” (SPIN) or “CENTRIF. DELICADO” (DELICATE SPIN).
Display
(TIEMPO)
The display shows the following information:
• Duration of the selected programme (in minutes), calculated auto-
matically on the basis of the maximum recommended load for each type
of fabric.
• When the programme has finished, a steadily lit zero is displayed.
• Delay start, (23 hours max.) programmed using the button PRESE-
LECCIÓN. The countdown is updated every hour du-
ring the first two hours and then every thirty minutes.
• Alarm code indicating a fault in the machine operation (see page 78).
PRELAVADO/
LAVADO
PREWASH/
WASH
Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up
the programme come on.
ACLARADO
ACLARADO
CENTRIFUGAR
FIN
RINSES
EXTRA
RINSE
SPIN
END
After the machine has started, only the running
phase pilot light stays on. When the programme
has finished, the FIN (End) pilot light comes on.
OVER-
SOBRE DOSIF.
DOSAGE
PUERTA
DOOR
When the programme has finished, if the SOBREDOSIFICACION light
(Overdosage) comes on, it indicates that too much detergent has been
used.
56
Description of the appliance
Cancelling a programme
To cancel a programme which is running, turn the programme selector
dial to the RESET O/OFF position.
Warning! After a programme which ends with water in the drum
(RINSE HOLD option), turn the selector dial first to O/OFF and then to
the programme “DESAGUAR”, “CENTRIFUGAR” or “CENTRIF. DELICA-
DO”.
Altering a programme which is running
To modify the selected programme turn the programme selector dial to
O/OFF and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.
Altering an option which is running
To alter an option, first set the machine to PAUSE by pressing the
START/PAUSE button.
Any option can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE button again to re-start the
selected programme.
To modify the selected programme turn the programme selector dial to
O/OFF and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.
Opening the door after the programme has started
To open the door set the machine to PAUSE by pressing the START/PAUSE
button.
The door can be opened if:
• the machine is not already heating;
• the water level is not above the bottom edge of the door;
• the drum is not turning.
The PUERTA light (Door) on the control panel indicates if the door can
be opened:
• green light: the door can be opened;
• red light: the door cannot be opened;
57
Detergent dispenser drawer
Compartment for prewash detergent. The prewash detergent is added at the
beginning of the wash programme.
Compartment for powder or liquid detergent used for main wash.
It is emptied at the beginning of the wash cycle.
Compartment for liquid additives (fabric softener, starch).
It is emptied at the last rinse.
The quantity of additives must not exceed the “MAX” mark in the
drawer.
Before the first wash
Before your first wash, we recommend that you pour 2 litres of water
into the main wash compartment
order to activate the ECO valve.
of the detergent drawer in
Then, run a cotton cycle at 90°, without any laundry in the
machine, to remove any manufacturing residue from the drum and
tub.
Pour 1/2 a measure of detergent into the dispenser drawer and start the
machine.
58
Preparing the wash cycle
Sorting out and preparing the laundry
• Sort out the laundry according to type of fabrics and care labels (see
“Types of fabric and care labels”).
• Empty pockets.
• Remove any metal parts (safety pins, clips, etc.).
• To prevent the laundry from getting damaged and forming bundles,
it is advisable to close zips, button up pillowcases and quilt covers and
tie up loose straps such as those of aprons.
• Turn double faced items inside out (sleeping bags, anoraks, etc.)
• Turn coloured knitted fabrics, woollens and fabrics with trim inside
out.
• Wash small and delicate items (baby socks, tights) inside a laundry net
or in a pillow case closed with a zip, or in larger socks.
• Treat curtains with special care. Remove all metal or plastic hooks or
put them in a net or a bag. We take no responsibility for any damage.
• Whites and coloureds must be washed separately: white items can
loose their whiteness.
• New coloured fabrics often have excess dyes; it is advisable to wash
them separately for the first time.
• Wash small and large items together; this improves the washing result
and the laundry is better distributed during spinning.
• Shake out garments before putting them into the machine.
• Insert each garment separately.
59
Preparing the wash cycle
Weight of laundry
Approximate
dry weights
Sort of laundry
Bathrobes
Work shirts
Quilt covers
Sheets
1200 g
300-600 g
700 g
500 g
Blouses
100 g
Hand towels
Tea towels
Shirts
200 g
100 g
200 g
Pillowcases
Night-gowns/Pyjamas
Tablecloths
Underwear
200 g
200-250 g
200-300 g
250 g
Types of fabric and care labels
The labels on garments help you to select the most suitable wash pro-
gramme. The laundry should be sorted out according to the type of fab-
ric and the instructions indicated on care labels.
Temperatures indicated on labels are always maximum temperatures.
95
Cotton
Linen and cottons marked with this symbol can be washed at high tem-
peratures.
60
Cotton
Linen and cottons marked with this symbol are colourfast and can be
washed at 60°C.
50
40
30
Cotton
Garments marked with these symbols have delicate colours, therefore
the washing temperature must not exceed these values.
40
60
Synthetics
Mixed and synthetic fabrics marked with these symbols require a gentle
wash programme and they must therefore be washed using the specific
programme.
60
Preparing the wash cycle
40
30
Delicates
Microfibres, synthetics or curtains marked with these symbols require a
very gentle treatment.
The DELICATES programme is suitable for this type of fabric.
40
30
Woollens and particularly delicate items
Fabrics such as wool, wool mix or silk marked with this symbol are par-
ticularly sensitive to machine washing.
The WOOL programme
is suitable for this type of fabric.
If the label has the symbol
be machine washed!
(do not wash), the garments must not
The wool wash cycle of this machine has been approved by Woolmark
for the washing of machine washable Woolmark products provided
that the garments are washed according to the instructions on the
garment label and those issued by the manufacturer of this washing
machine. M9604.
61
Preparing the wash cycle
Detergents and additives
Which detergent and additive?
Use only detergents and additives for washing machines. Follow the
manufacturer’s instructions.
How much detergent?
The quantity depends on:
• the load:
if the manufacturer does not provide any indications on the amount of
detergent for small loads, use about one third less than the suggested
amount for half loads and half the amount for very small loads;
• the degree of soil:
use a small amount of detergent for lightly soiled garments. Judge
the amount according to the detergent manufacturer’s instructions
and size of the load;
• the water hardness:
the harder the water, the more detergent required. Instructions
according to water hardness are given on the detergent pack.
Liquid detergent
Liquid detergent can be poured directly into the main wash compartment
of the dispenser drawer immediately before starting the programme, or
a special dispenser can be used that is placed directly in the drum. Mea-
sure the detergent according to the manufacturer’s instructions.
Adding a water softener (descaling product)
A water softener must be added when water has a medium-high degree
of hardness (from degree of hardness II). Follow the manufacturer’s
instructions. The quantity of detergent can then always be adjusted to
degree of hardness I (= soft). Information on water hardness can be
obtained from your local water supply authority.
Information on water hardness
Degree of hardness
German degrees °dH French degrees °TH
I=Soft
0-7
7-14
0-15
16-25
II=Medium
III=Hard
15-21
26-37
IV=Very hard
more than 21
more than 37
62
How to wash
Load the laundry
Open the door.
Place the laundry in the drum, one item at a time. Distribute laundry as
evenly as possible. Close the door.
Add detergent and additives
Pull the drawer out till it stops.
Pour the main wash detergent into com-
partment
.
If you wish to perform a PREWASH pro-
gramme, pour detergent or stain remover into
compartment
.
Pour the fabric softener into compartment
without exceeding the “MAX” mark.
Close the drawer gently, pushing it fully in.
63
How to wash
Select the desired wash programme
62895
Turn the programme selector
PRELAVADO/
LAVADO
dial to the desired position:
ACLARADO
OFF
RESISTENTES
COLOR
. DELICADO
CENTRIF
CENTRIFUGAR
DESAGUAR
90
90E
60E
40E
the lights corresponding to
ACLARADO
VIZANTES
SUA
the different phases making
ACLARADOS
CENTRIFUGAR
DELICADOS
40
30
up the selected programme
FRIO
FIN
30
40
FRIO
60
50
LANA
light on.
SOBRE DOSIF.
.-
SINT
MEZCLA
FRIO
The display shows the dura-
40
30
40
FRIO
40
FÁCIL
DELICADO
tion of the programme.
PUERTA
PROG.
CORTO
Select the desired options
depending on the degree of soil of the laundry.
The corresponding light comes on.
PRE-
LAVADO DELICADOS
Select the spin speed or RINSE HOLD option
1200
900
600
It is possible to select a lower spin speed by means of
the relevant button; the light corresponding to the
selected speed comes on.
STOP
Selecting the option RINSE HOLD the laundry is left
immersed in the final rinse water.
ACLARAD.
If the spin speed is not reduced, the final spin speed
will be as follows:
- cottons
1200 r.p.m. (L62895)
1000 r.p.m. (L60895)
- synthetics
1000 r.p.m. (L60895)
0900 r.p.m. (L62895)
1000 r.p.m. (L60895)
0900 r.p.m. (L62895)
- delicates
- wool
(hand washing)
1000 r.p.m. (L60895)
0900 r.p.m. (L62895)
64
How to wash
EXTRA RINSE
This appliance is designed for saving water. However, for people with
a very delicate skin (allergic to detergents) it may be necessary to
rinse the laundry using an extra quantity of water (extra rinse).
The extra rinse is available only with the cotton, synthetics or delicate
programme and with programme ACLARADOS DELICADOS (RINSES).
Selection of the EXTRA RINSE option
Press simultaneously the buttons CENTRIFUGADO (SPIN SPEED) and
PRESELECCIÓN (DEAY START) for about 3 seconds: the light ACLARA-
DO + comes on in the programme progress display.
This function stays permanently on. To remove it press the buttons
CENTRIFUGADO (SPIN SPEED) and PRESELECCIÓN (DEAY START) again
until the pilot light ACLARADO + comes off.
Select the DELAY START option
To delay starting of a programme, press the PRESELECCIÓN (DELAY
START) button before starting the machine. The figures correspond-
ing to the selected delay will be displayed for about 3 seconds, after
which the duration of the selected programme will appear on the dis-
play.
When the START/PAUSE button is pressed, the selected delay will
appear again on the display and the machine starts its countdown.
65
How to wash
Starting the programme
1. Check that the water tap is open and the door is closed.
2. Press START/PAUSE to start the programme.
If the Delay Start option has been selected the programme will start
at the end of the countdown.
If the light FIN (END) is flashing at the start of the programme it indi-
cates that the door is open. Close the door and press the START/PAUSE
button again.
If the delay start option has been selected, the machine starts its
countdown, in hours for the first two hours and then every 30 min-
utes, which will appear on the display. During this period it is possible
to load other laundry, or to cancel the delay time.
• Load other laundry: press the START/PAUSE button. Open the door.
Load the laundry. Close the door and press the START/PAUSE button
again.
• Cancel the delay time: press the START/PAUSE button. Press the
DELAY START button until the symbol 0’ appears on the display.
Press the START/ PAUSE button again if you wish to restart the pro-
gramme.
Programme progress display
PRELAVADO/
LAVADO
PREWASH/
WASH
By selecting the wash programme, the pilot lights corre-
sponding to the various phases making up the programme
come on. After the machine has started, only the running
phase pilot light stays on.
ACLARADO
ACLARADO
CENTRIFUGAR
FIN
RINSES
EXTRA
RINSE
SPIN
END
OVER-
DOSAGE
SOBRE DOSIF.
PUERTA
DOOR
Display
The time to the end of the programme decreases minute by minute and
appears on the display.
66
How to wash
At the end of the programme
The machine stops automatically. A steadly zero appears on the display.
The FIN (END) light comes on in the programme progress display, the
START/PAUSE button goes off and the light PUERTA is green.
If the RINSE HOLD option has been selected, the START/PAUSE button
goes off, the pilot light END on the programme progress display illumi-
nates, the light PUERTA is red and the display shows a static zero to indi-
cate that the water must be emptied out.
To empty out water there are two possibilities:
• Select programme “DESAGUAR” (draining):
The water is emptied out without spinning.
• Select programme “CENTRIFUGAR” (spin) or “CENTRIF. DELICADO”
(delicate spin). Select the spin speed by means of the relevant button
and then depress the START/PAUSE button. The water is emptied out
and the laundry is spun at the selected spin speed.
Warning! The programme selector dial must be turned first to RESET
O/OFF and then to the DRAIN programme DESAGUAR, CENTRIFU-
GAR (spin) or CENTRIF. DELICADO (delicate spin).
Turn the selector dial to O/OFF to switch the machine off.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items
being damaged in a subsequent wash (e.g. shrinking) or their colour
running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
67
Programme chart
Wash programmes for cottons
Consumption*
Wash
Additional Max.
functions load
Temp.
Fabrics
Energy
programme
Water lt.
kWh
Cotton and linen,
for example nor-
mally soiled work
garments, sheets,
household linen,
underwear, towels.
PREWASH
SENSITIVE
White
Cottons
and Linens
QUICK WASH
90°
6 kg
2.3
63
EXTRA RINSE
RINSE HOLD
SPIN SPEED
White cotton and
linen, for example
90E normally to lightly
soiled sheets and
PREWASH
SENSITIVE
EXTRA RINSE
RINSE HOLD
SPIN SPEED
90E
Whites
ECONOMY
6 kg
6 kg
6 kg
1.55
1.02
1.14
52
49
49
household linen.
PREWASH
SENSITIVE
EXTRA RINSE
RINSE HOLD
SPIN SPEED
60E
Cottons
ECONOMY
Whites and fast-
coloureds.
●
( )60E
PREWASH
SENSITIVE
EXTRA RINSE
RINSE HOLD
SPIN SPEED
40E
Coloured
cottons
40E Non fast-coloureds.
ECONOMY
PREWASH
40°-30°
SENSITIVE
Coloured cotton or
linen fabric, shirts,
underwear, towels.
Coloured
cottons
FRIO
QUICK WASH
EXTRA RINSE
RINSE HOLD
SPIN SPEED
6 kg
0.6
60
(Cold)
●
( ) In compliance with EC directive 92/75, the consumption figures indicated on
the energy label refer to the “60E” wash programme for cotton.
* The consumption data shown on this chart is to be considered purely indica-
tive, as it may vary depending on the quantity and type of laundry, on the inlet
water temperature and on the ambient temperature. It refers to the highest tem-
perature for each wash programme.
For the duration of the programmes, please refer to the display on the
control panel.
68
Programme chart
Wash programmes for synthetics, delicates and wool
Consumption*
Wash
programme
Additional Max.
functions load
Temp.
Fabrics
Energy
kWh
Water lt.
PREWASH
SENSITIVE
QUICK WASH
EXTRA RINSE
RINSE HOLD
SPIN SPEED
Synthetic fabrics,
underwear,
coloured garments,
non-shrink shirts,
blouses.
60°-50°
40°
FRIO
Synthetics
2.5 kg
0.9
0.4
54
(Cold)
PREWASH
QUICK WASH
EXTRA RINSE
RINSE HOLD
SPIN SPEED
INTENSIVE
Synthetics, easy
iron.
Synthetics 40°
2.5 kg
59
PREWASH
40°-30°
Delicates FRIO
QUICK WASH
Delicate fabrics, for
example curtains.
EXTRA RINSE
RINSE HOLD
SPIN SPEED
2.5 kg
2 kg
0.5
55
55
(Cold)
Wool
40°-30°
FRIO
(Cold)
RINSE HOLD
SPIN SPEED
Wool, wool mix-
tures, silk.
0.35
Hand wash
* The consumption data shown on this chart is to be considered purely indica-
tive, as it may vary depending on the quantity and type of laundry, on the inlet
water temperature and on the ambient temperature. It refers to the highest
temperature for each wash programme.
For the duration of the programmes, please refer to the display on the
control panel.
69
Programme chart
Special programmes
Descrip-
Consumption*
Additional Max.
functions load
Programme
Programme phases
Energy
tion
Water lt.
kWh
This pro-
ACLARA-
DOS DELI-
CADOS
(Gentle
rinses)
EXTRA RINSE
SENSITIVE
RINSE HOLD
SPIN SPEED
gramme can
be used for
rinsing hand
washed gar-
ments.
3 rinses with liquid
additive.
Short spin.
6 kg
0.05
55
Hand washed
garments to
be starched
or softened.
SUAVIZAN-
TES
(Softeners)
1 rinse with liquid
additive.
Long spin.
RINSE HOLD
6 kg
19
SPIN SPEED
For emptying
out the last
rinse water in The water is emp-
programmes
with the RINSE
HOLD option
DESA-
GUAR
(Drain)
/
/
tied out.
CENTRIFU-
GAR
(Spin)
Separate spin
for cottons.
SPIN SPEED
SPIN SPEED
Long spin.
Short spin.
6 kg
Separate spin
for synthetics,
delicate fab-
rics and wool.
CENTRIF.
DELICADO
Short spin
2.5 kg
For cancelling the
programme which
is running or to
switch the machine
off.
O/OFF
(Reset/Off)
* The consumption data shown on this chart is to be considered purely
indicative, as it may vary depending on the quantity and type of laundry,
on the inlet water temperature and on the ambient temperature.
For the duration of the programmes, please refer to the display on the
control panel.
70
Cleaning and maintenance
After each wash
At the end of the wash programme, pull the dispenser drawer out a lit-
tle to let it dry.
Leave the door ajar to allow air to circulate.
If the machine is not used for a prolonged period:
Close the water tap and unplug the appliance.
Periodical cleaning
Exterior
Clean the outside of the cabinet with soap
and water only. Rinse with clean water and
dry.
Important: do not use methylated spirits,
solvents or similar products to clean the
cabinet.
Detergent dispenser drawer
After a while, detergents and fabric softeners leave deposits in the
drawer.
Clean the drawer, from time to time, by rinsing it under a running
tap. To remove the drawer from the
machine, press the button in the rear left-
hand corner.
To facilitate cleaning, the top part of the
additive compartments can be removed.
Detergent can also accumulate inside the
drawer recess: clean it with an old tooth-
brush.
Refit the drawer after cleaning.
71
Cleaning and maintenance
Door seal
Check from time to time the door seal and
eliminate eventual possible objects that
could be trapped in the fold.
Drain pump
The pump should be inspected regularly and particularly if
the machine does not empty
and/or spin
the machine makes an unusual
noise during draining due to
objects such as safety pins, coins
etc. blocking the pump.
Proceed as follows:
Disconnect the appliance.
If necessary wait until the water
has cooled down.
Open the pump door.
Place a container close to the
pump to collect any spillage.
Release the emergency emptying
hose, place it in the container
and remove its cap.
When no more water comes out,
unscrew the pump and remove it. Always keep a rag nearby to dry up
spillage of water when removing the pump.
72
Cleaning and maintenance
Remove any objects from the
pump impeller by rotating it.
Put the cap back on the emer-
gency emptying hose and place
the latter back in its seat.
Screw the pump fully in.
Close the pump door.
Water inlet filter
If you notice that the machine is
taking longer to fill, check that the
filter in the water inlet hose is not
blocked.
Turn off the water tap.
Unscrew the hose from the tap.
Clean the filter in the hose with a stiff brush.
Screw the hose back onto the tap.
Emergency emptying out
If the water is not discharged, proceed as fol-
lows to empty out the machine:
pull out the plug from the power socket;
close the water tap;
if necessary, wait until the water has cooled down;
open the the pump door;
place a bowl on the floor and place the end of the emergency emptying hose
into the bowl. Remove its cap. The water should drain by gravity into the
bowl. Whe the bowl is full, put the cap back on the hose. Empty the bowl.
Repeat the procedure until water stops flowing out;
clean the pump if necessary as previously described;
replace the emergency emptying hose in its seat after having plugged it;
screw the pump again and close the door.
73
Cleaning and maintenance
Frost precautions
If the machine is installed in a place where the temperature could drop below
0°C, proceed as follows:
Close the water tap and unscrew the water inlet hose from the tap.
Place the end of the emergency emptying hose and that of the inlet hose in
a bowl placed on the floor and let water drain out.
Screw the water inlet hose back on and reposition the emergency emptying
hose after having put the cap on again.
By doing this, any water remaining in the machine is removed, avoiding ice
forming and consequently damage to the appliance.
When you use the machine again, make sure that the ambient temperature
is above 0°C.
Important!
Every time you drain the water through the emergency emptying hose
you must pour 2 litres of water into the main wash compartment of the
detergent drawer and then run the drain programme “C”. This will acti-
vate the ECO valve avoiding that part of the detergent remains unused
at next washing.
74
Something not working?
Something not working?
If during the spin cycle the machine makes an unusual
whistling noise, different from the noise made by tradi-
tional washing machines, this is due to a
new type of motor.
If water is not visible in the drum, this is due
to the modern technology of new washing
machines that use less water than traditional
machines.
Troubleshooting
If a problem arises, you can try to solve it yourself following the
instructions below.
If you call out an engineer when one of the following problems aris-
es, or to repair a fault due to incorrect use, the call-out will be
charged even if requested within the guarantee period.
During machine operation it is possible that an acoustic warning signal
sounds, the FIN (END) light blinks and the following alarm codes may be
displayed:
- E10: problem with the water supply
- E20: problem with water draining
- E40: door open
Once the problem has been eliminated, press the START/PAUSE button
to restart the programme. If after all checks, the problem persists, con-
tact your local AEG/ELECTROLUX Service Force Centre.
Problem
Possible cause
Solution
The main electrical fuse
has blown.
Replace the fuse.
The door is not properly
Close the door; the click
closed (E40).
of the lock should be heard.
The machine does not work
The plug is not connected. Insert the plug.
The START button has not
been pressed.
Press the button.
The DELAY START
Check the selected delay on
option has been selected. the display.
75
Something not working?
Problem
Possible cause
Solution
The water tap is closed (E10). Open the water tap.
The water inlet hose is
Check the whole length of the
squashed or kinked (E10). hose and remove the kink.
The machine does not fill
The small filter of the water Clean the filter.
inlet hose is clogged (E10).
The door is not properly
Close the door.
closed (E40).
The end of the drain hose Place the hose at the right
The machine fills then
empties immediately
is too low.
height (see Installation
section).
The drain hose is
Check the whole length of
squashed or kinked (E20). the hose and remove the
kink.
The drain pump or the
Clean the pump or check
drain hose are clogged (E20). the hose.
The machine does not
empty and/or does not spin
The RINSE HOLD option
Empty out the water by
(stop with water in drum) selecting the DRAIN
has been selected.
programme.
The laundry is not evenly
Redistribute the laundry
distributed inside the drum. manually in the drum.
Too much detergent has
been used.
Measure detergent
according to the
manufacturer’s instructions.
An unsuitable detergent
has been used that
Use a suitable washing
machine detergent.
creates too much foam.
One of the connectors on Check that the hose is
the water inlet hose is
leaking.
firmly screwed on at both
ends.
There is water on the floor
The drain pump has not
Fully screw the pump into
been properly screwed on place.
after cleaning.
The cap on the emergency Replace the cap on the
emptying hose has not been emergency emptying hose
replaced after cleaning the after cleaning the pump.
pump.
76
Something not working?
Problem
Possible cause
Solution
The transit bolts have
not been removed.
Check that the machine
has been unpacked as
described in the Installation
section.
The machine vibrates or is
noisy
The feet have not been
adjusted.
Carefully level the machine.
There is little laundry in
the drum.
Correct operation of the
machine is not affected.
The programme is still
running and the drum
is turning.
Wait until the end of the
programme before opening
the door.
The water level is above the Before opening the door,
bottom edge of the door. the water must be emptied
out.
The door will not open
The machine is heating the Wait until the end of the
water.
heating phase.
The unbalance detection
device that prevents
If the laundry is not evenly
distributed inside the drum
excessive vibration during at the beginning of the
spinning has cut in.
spin cycle, the machine
detects this and tries to
redistribute it more evenly
by means of a few drum
rotations.
Only when the laundry is
more evenly distributed
will the spin cycle be
performed, at a lower speed,
if the laundry is not evenly
distributed.
Spinning starts late or the
machine does not spin
If, after about 10 minutes,
the laundry is still tangled,
the machine will not spin.
Therefore, if the laundry is
still wet at the end of the
cycle, it is advisable to
redistribute it manually
inside the drum and to
select the spin programme.
77
Something not working?
Unsatisfactory washing results
If the laundry looks grey and lime scale is found in the drum
• Too little detergent has been used.
• An unsuitable detergent has been used.
• Stubborn stains have not been treated prior to washing.
• The programme/temperature has not been correctly selected.
If grey stains remain on the laundry
• Laundry stained with ointments, grease or oil has been washed with
an insufficient amount of detergent.
• The temperature selected for the wash programme was too low.
• Fabric softener - especially the concentrated type - has come into
direct contact with the laundry. Wash these stains immediately and
pour fabric softener carefully.
Foam is still visible even after the last rinse
• Modern detergents often produce foam, even in the last rinse. How-
ever the laundry has been completely rinsed.
White residue is left on the laundry
• This is due to insoluble components in modern detergents and is
therefore not the result of insufficient rinsing. Shake or brush the
laundry. In future, it may be better to turn garments inside out before
washing them. Check the choice of detergent; try using liquid deter-
gents.
78
Technical data
Height x Width x Depth
Depth with door opened
Height adjustment
Load (depending on programme)
Use
85x60x60 cm
101.5 cm
10 mm approx.
6 kg max.
domestic
Drum speed during washing
Drum speed during spinning
max. 55 rpm
1200/900600 rpm (L62895)
1000/800/600 rpm (L60895)
Water pressure
0.05 - 0.8 MPa
This appliance complies with the following EC directives:
-
73/23/EEC of 19.2.1973 “Low voltage directive”, including directive
93 / 68 / EEC
89/336/EEC of 3.5.1989 “Electromagnetic Compatibility Directive”.
-
79
Service
In the section “Something not working?” some problems that can be
solved by yourself are listed. Read this section in the event of problems.
If you are not able to find a solution, contact the Service centre.
In all cases, explain your problem carefully, in order to facilitate trou-
bleshooting: the engineer will be able to decide whether a service call
is necessary.
Take note of the serial number (Ser.No.) and the product number (Prod.
No.) indicated on the rating plate.
Ser. No. . . . . . . . . . . . . . . . . . . . . . . .
Prod. No. . . . . . . . . . . . . . . . . . . . . . .
Furthermore, try to specify, as precisely as possible:
-
-
-
The symptoms of the fault
When the fault occurs
The alarm code displayed
When can a service visit be charged during the guarantee period?
-
when it should have been possible to solve the problem by yourself,
with the help of the troubleshooting chart (see section “Something
not working?”)
-
when the engineer has to come out several times because he has
not been given all the relevant information he needs and so, for
example, has to fetch spare parts. Repeated trips can be avoided if
you prepare your call to the Service centre as described above.
80
Instructions for installation and electrical connection
Safety instructions for the installer
• This appliance is heavy, care should be taken when moving it.
• When unpacking the appliance, check that it is not damaged. If in
doubt, do not use it and contact the retailer.
• All internal packing must be removed before using the appliance.
Serious damage may be caused to the machine or adjacent furniture
if the protective transit devices are not completely removed. Refer to
the relevant paragraph.
• Any electrical work required to install this appliance must be carried
out by a qualified electrician.
• Any plumbing work required to install this appliance must be carried
Made in EEC
Mod. L62895
Type P6947646
Prod.No. 914524155 00
IPX4
220-230V~50Hz 2200 W
10 A
Ser.No.
ELECTROLUX ELECTRODOMESTICOS
C.I.F. A-08145872
ESPAÑA,S.A.
out by a qualified plumber.
• After having installed the machine, check that it is not standing on
its electrical supply cable.
• If the appliance is placed on a carpeted floor, ensure that air can cir-
culate freely between the adjustable feet and the floor.
• The installation should comply with local water authority and build-
ing regulations requirements.
• Should the appliance power supply cable need to be replaced, this
should be carried out by our Service Force Centre.
81
Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
After removing all the packaging, carefully
lay machine on it’s back to remove the poly-
styrene base from the bottom.
HEC0008
Remove the pow-
er supply cable
and the draining
hose from the
hose holders on
the rear of the
appliance.
A
With a suitable
spanner, supplied
HEC0002S
HEC0001
with the machine
unscrew and
remove the central
rear bolt A. Slide
out the relevant
C
plastic spacer.
D
Unscrew and
B
remove the two
large rear bolts B
C
B
HEC0003S
HEC0011S
and the six smaller bolts C.
Remove the bracket D. Tighten up the six
smaller bolts C.
C
C
HEC0014
82
Installation
Open the porthole,
take out the inlet
hose from the
drum and remove
the polystyrene
block fitted with
the adhesive tape
on the door seal.
HEC0010
HEC0005
Fill the smaller
upper hole and the two large ones with the
corresponding plastic plug caps supplied in the
bag containing the instruction booklet.
Important!
All the different plug caps are supplied with
the appliance in the plastic bag containing the
instruction booklet.
P0002
Connect the water inlet hose as described
under the paragraph “Water inlet”.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by
carpets, rugs etc.
• Before placing it on small tiles, apply a rubber coating.
• Never try to correct any unevenness in the floor by putting pieces of
wood, cardboard or similar materials under the machine.
• If it is impossible to avoid positioning the machine next to a gas
cooker or coal-burning stove, an insulating panel (85x57 cm) covered
with aluminium foil on the side facing the cooker or stove, must be
inserted between the two appliances;
• The machine must not be installed in rooms where the temperature
can drop below 0.
• The water inlet hose and the drain hose must not be kinked.
• Please ensure that when the appliance is installed, it is easily accessi-
ble for the engineer in the event of a breakdown.
83
Installation
Levelling
Carefully level by screwing the adjustable
feet in or out. Never place cardboard, wood
or similar materials under the machine to
compensate for any unevenness in the
floor.
Water inlet
Attention!
• An inlet hose is supplied and can be found inside the machine drum.
• Do not use the hose from your previous machine to connect to
the water supply.
• This appliance must be connected to a
cold water supply.
1. Open the porthole and extract the inlet
hose.
2. Connect the hose with the angled con-
nection to the machine.
HEC0006
Important!
Do not place the inlet hose downwards. Angle the hose to the left
or right depending on the position of your water tap.
3. Set the hose correctly by loosening the ring nut. After positioning the
inlet hose, be sure to tighten the ring nut
again to prevent leaks.
4. Connect the hose to a tap with a 3/4”
thread.
Always use the hose supplied with the appli-
ance.
Installation should comply with local water
authority and building regulations’ require-
ments. A minimum water pressure of 0.05
MPa (0.5 bar) is required for safe operation of the appliance.
If you cannot make the cold water connection direct from the rising
mains, you may be able to operate the appliance from your cold water
storage system. There should be a minimum distance of 5.02m (16.5 ft)
between theappliance’s inlet and the bottom of the water storage tank.
84
Installation
Water drainage
The end of the drain hose can be positioned
in three ways:
Hooked over the edge of a sink using the
plastic hose guide supplied with the
machine. In this case, make sure the end
cannot come unhooked when the machine
is emptying.
This could be done by tying it to the tap
with a piece of string or attaching it to the wall.
In a sink drain pipe branch. This branch must be above the trap so that
the bend is at
least 60 cm above
the ground.
Directly into a
drain pipe at a
height of not less
than 60 cm and
not more than
90 cm.
The end of the drain hose must always be ventilated, i.e. the inside
diameter of the drain pipe must be larger than the outside diameter of
the drain hose.
The drain hose must not be kinked.
85
Installation
Electrical connection
This machine is designed to operate on a 220-230 V, single-phase,
50 Hz supply.
Check that your domestic electrical installation can take the maximum
load required (2.2 kW), also taking into account any other appliances in
use.
Connect the machine to an earthed socket.
The manufacturer does not accept any responsibility for damage or
injury through failure to comply with the above safety precaution.
Permanent connection
In the case of a permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3 mm between the switch contacts and
of a type suitable for the required load in compliance with the current
electrical regulations.
The switch must not break the yellow and green earth cable at any
point.
This operation must be performed by a qualified electrician.
Important: The power supply cable must be easily accessible after
installing the machine.
86
87
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
© Copyright by AEG/ELECTROLUX
132974550-01-0107
Salvo modificaciones
Subject to change without notice
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and
outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing
machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of
approx. USD 14 billion in more than 150 countries around the world.
|