QuickSpecs
Overview
ProLiant BL20p and p-Class system
What's New
•
Price/performance dual processor server
blade designed with enterprise
availability ProLiant BL20p Server Blade
includes:
•
Intel Pentium III FC-PGA
1.4 GHz processor (dual capability)
ServerWorks HE- SuperLite Chipset
512-MB or 1024-MB PC133-MHz
Registered ECC SDRAM memory, (2 x 1
Interleaved Memory), expandable to 4
GB
•
•
•
•
Three NC3163 Fast Ethernet Embedded
WOL (Wake On LAN) NICs standard
Two NICs are upgradable to
10/100/1000T using the Dual Gigabit
Ethernet NC7780 NIC option kit
One additional 10/100 port dedicated to
Integrated Lights-Out (iLO) Management
Smart Array 5i Controller with battery-
backed write cache option (integrated on
system board)
•
•
•
•
Wide Ultra3 SCSI Drive Cage standard
supports up to two 1″ Wide Ultra3 hot
plug hard drives
Integrated Lights-Out (iLO) Advanced
Management (ASIC on motherboard)
Plugs vertically into 6U enclosure
Up to 48 BL20p blades fit in 42U rack
•
•
•
ProLiant BL p-Class Server Blade
Enclosure:
•
•
•
Server blades and interconnects blind
mate into server blade enclosures for
network connection and power
Server blade enclosure is 6U and holds
up to 8 ProLiant BL20p server blades
and 2 interconnects
2 types of interconnects available:
interconnect switches or patch panels
•
ProLiant BL p-Class Power Enclosure:
•
Use BL p-Class sizing tool to determine
power based on your configuration
/proliant-bl/p-class/index.html
Note: This Web site is available in
English only.
•
•
•
•
BL p-Class power enclosure provides
shared, external, redundant power
Power enclosure is 3U and holds up to 6
hot-plug power supplies
Choose single-phase or three-phase
power
BL p-Class power enclosure with power
supplies not needed if using facility
-48VDC ± 10% in this case purchase DC
option kit
•
ProLiant BL p-Class Power Distribution:
•
Distributes power from the power
enclosure to the server blade enclosures
•
Three power distribution choices:
•
•
•
BL p-Class scalable bus bar
BL p-Class mini bus bar
BL p-Class power bus box
•
•
BL p-Class server blade, server blade
enclosure, interconnects and power
enclosure protected by a limited three year
warranty with optional service uplifts available
Note: Power requirements for a ProLiant BL
p-Class system: 200V − 240V AC,
30 amp or facility DC -48V ± 10%.
DA-11411
Canada — Version 1 — August 26, 2002
1
QuickSpecs
ProLiant BL20p and p-Class system
Standard Features
Compaq ProLiant BL20p Server Blade
Intel Pentium III FC-PGA processor 1.40GHz
Processor
Upgradable to dual processing
512-KB Level 2 Cache
Upgradability
Cache Memory
Chipset
ServerWorks HE- SuperLite Chipset
Note: For more information regarding ServerWorks, please see the following URL:
Note: This Web site is available in English only.
Standard
512MB PC133-MHz Registered ECC SDRAM DIMM Memory (2 X 256 MB)
(1 processor model)
Memory
Maximum
Standard
4096 MB
1024MB PC133-MHz Registered ECC SDRAM DIMM Memory (2 x 512 MB)
(2 processor model)
Maximum
4096 MB
Note: Memory must be installed in pairs.
Four NICs total:
Network Controller
Three Compaq NC3163 Fast Ethernet NIC PCI 10/100 with full WOL (Wake On LAN), one with PXE support
One 10/100 iLO NIC dedicated to management
Two NICs are upgradable to 10/100/1000T using the Dual Gigabit Ethernet NC7780 NIC option kit
Integrated Lights-Out (iLO) Management Advanced (ASIC on the System Board)
Manageability
Hard Drives
None ship standard
Internal Storage
Maximum Internal Storage
145.6 GB (internal drive cage) (2 x 72.8 GB Wide Ultra3, 1″ drives)
No PCI slots all features are integrated
Expansion Slots
Compaq ProLiant BL p-Class Server Blade Enclosure and Interconnects
6U (10.5-inch), 19-inch wide
Holds up to 8 ProLiant BL20p servers blades
ProLiant BL p-Class Server
Blade Enclosure
10 bays per server blade enclosure
8 bays for server blades
2 outside bays for interconnect modules (RJ-45 patch panels or GbE interconnect switches)
Server blades blind mate into the server blade enclosure backplane for power and data connections
Up to 6 BL p-Class 6U server blade enclosures fit in a 42U rack
Server blade management module attached to the back of each BL p-Class 6U server blade enclosure to report
events all servers and provide asset and inventory information
Redundant 200V − 240V AC, 30 amp single-phase
Redundant 208V 30amp 3-phase 4 wire,
Redundant -48VDC ± 10%
ProLiant BL p-Class Power
Requirements
DA-11411
Canada — Version 1 — August 26, 2002
3
QuickSpecs
ProLiant BL20p and p-Class system
Standard Features
Compaq ProLiant BL p-Class Server Blade Enclosure and Interconnects (continued)
Provides up to a 32 to 1 server networking cable reduction per server enclosure. Each interconnect switch (two
ProLiant BL p-Class
Interconnect Switch Option
(Two switches per kit)
(Every BL p-Class server blade enclosure
requires two Interconnect switches OR two
RJ-45 patch panels)
per enclosure) reduces sixteen 10/100 Base-T/Base-TX server network ports to four uplinks ports (eight uplinks
total). Only one to all eight uplinks may be used per enclosure.
The ProLiant BL p-Class F-GbE Interconnect Kit includes two GbE interconnect switches and two DualTSX
Interconnect Modules that provide four (4) LC 1000 SX and four (4) RJ-45 10/100 T/TX uplink ports per server
enclosure.
The ProLiant BL p-Class C-GbE Interconnect Kit includes two GbE interconnect switches and two QuadT
Interconnect Modules that provide four (4) RJ-45 10/100/1000 T/TX/T and four (4) RJ-45 10/100 T/TX uplink ports
per server enclosure.
Also included (per Interconnect Switch):
•
•
•
•
•
•
•
•
•
Two (2) RJ-45 10/100 T/TX front panel ports for management or additional uplinks
One (1) RS-232 DB-9 front panel out-of-band management port
Redundant 10/100 cross links ports connecting the two Interconnect Switches
Redundant power and cooling inputs
Hot-plug and hot- remove with configuration retention capability
Power ON, management, and per port status and speed LED indicators
Reset/power momentary push-button switch
Compaq ProLiant BL Interconnect Switch Management Utilities and User Documentation CD
Fully pre-configured for rapid deployment and immediate operation
ProLiant BL Interconnect Switch Management System and Utilities:
Full featured web-based interface, menu-driven console interface, Telnet, SNMP-based scripting utility and
example scripts, SNMP and RMON MIBs, BootP and DHCP client, port mirroring, QoS packet prioritization, IGMP
multicasting, and TFTP server utilities for management of interconnect switch.
6U (10.5-inch), Plugs into BL p-Class 6U server blade enclosures
Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections
Supports Gigabit Ethernet network controllers
ProLiant BL p-Class RJ-45
patch panel
(Two patch panels per kit)
(Every BL p-Class server blade enclosure
requires two Interconnect switches OR two
RJ-45 patch panels)
16 RJ-45 connectors on the back of each BL p-Class 6U RJ-45 patch panel (32 RJ-45 connections per server
blade enclosure)
10Base-T
Categories 3, 4 or 5 UTP (100 metres)
EIA/TIA-568 100-ohm STP (100 metres)
Required Network Cabling
100Base-TX Category 5 UTP (100 metres)
EIA/TIA-568 100-ohm STP (100 metres)
1000Base-T Category 5 UTP (100 metres)
EIA/TIA-568 100-ohm STP (100 metres)
1000Base-SX 50/125 µm Multimode Fiber, 400 MHz/Km (500 metres)
50/125 µm Multimode Fiber, 500 MHz/Km (550 metres)
62.5/125 µm Multimode Fiber, 160 MHz/Km (220 metres)
62.5/125 µm Multimode Fiber, 200 MHz/Km (275 metres)
Note: For cabling information, refer to the Compaq Web site at: http://www.compaq.com/products/servers/.
Note: This Web site is available in English only.
Note: To determine power configuration please refer to the ProLiant BL p-Class Overview and Planning
Whitepaper and sizing tool, please see the following URL:
Compaq ProLiant BL p-Class
Power System and Rack
Information
Note: This Web site is available in English only.
3U (5.25-inch), 19-inch wide, 29-inch deep (0.48-metre wide, 0.74-metre deep), Dual input single phase and three
phase models available
ProLiant BL p-Class Power
Enclosure
BL p-Class power enclosure provides external, shared hot-plug power. Each power enclosure houses up to six
hot-plug power supplies to power the BL p-Class server blades and interconnects
Power enclosures and power supplies are not needed if using facility DC (-48V DC ± 10%). If using facility DC,
only Facility DC Power Connection kit part number (240563-B21) is needed.
DA-11411
Canada — Version 1 — August 26, 2002
4
QuickSpecs
ProLiant BL20p and p-Class system
Standard Features
Compaq ProLiant BL p-Class Server Blade Enclosure and Interconnects (continued)
In the ProLiant BL p-Class infrastructure, redundant -48 VDC power (from the power enclosures or facility DC
BL p-Class Power Distribution
power) is distributed from the power enclosures to the server blade enclosures through the Compaq bus bar
system. Hinges attach the ProLiant BL bus bars to the rails in a rack. The bus bars swing open from the centre to
enable easy rear access to the server blades and network cables. Power is distributed redundantly through
independent A- and B-sided bus bars.
Three different power distribution solutions are available depending on the maximum number of server blade
enclosures planned for the rack:
•
•
Compaq ProLiant BL p-Class scalable bus bar
Compaq ProLiant BL p-Class mini bus bar
Note: To support a full 42U rack of BL20p server blades (6 server blade enclosures), two mini bus bars are
needed.
•
Compaq ProLiant BL p-Class power bus box
Power Enclosures
Supported
Server Blade Enclosures
Supported
Max. Rack Space
Occupied
Scalable Bus Bar
Mini Bus Bar
1 or 2
≤ 5
≤ 3
1
36U
21U
9U
1
1
Power Bus Box
Two 30amp redundant power feeds per power enclosure
Connectors
Required Power Source
–NEMA receptacles
NA 1-phase
L6-30, 250v, 30A 3-wire
L15-30, 250V, 30A, 4-wire
NA 3-phase
Optimized for power cabling from bottom and network cabling from top
For cabling information, refer to the Compaq Web site at
Note: This Web site is available in English only.
DA-11411
Canada — Version 1 — August 26, 2002
5
QuickSpecs
ProLiant BL20p and p-Class system
Standard Features
Compaq ProLiant BL p-Class Server Blade Enclosure and Interconnects (continued)
Optional ProLiant Essentials Value Optional software offerings that selectively extend the functionality of an
ProLiant Essentials Foundation
Pack Software
Packs
Adaptive Infrastructure to address specific business problems and needs:
•
Rapid Deployment Pack – an automated solution for multi-server
deployment and provisioning, enabling companies to quickly and easily
adapt to changing business demands.
•
Workload Management Pack – provides easier management of
complex environments, improving overall server utilization and enabling
Windows 2000 customers for the first time to confidently deploy multiple
applications on a single multiprocessor ProLiant Server.
•
Integrated Lights-Out Advanced Pack - The BL20p includes the
advance version of the Integrated Lights-Out which includes graphical
console and virtual media.
Insight Manager™ 7
Insight Manager 7 helps maximize system uptime and performance and
reduces the cost of maintaining the IT infrastructure by providing proactive
notification of problems before those problems result in costly downtime and
reduced productivity. Insight Manager 7 is easy to set up and provides rapid
access to detailed fault and performance information gathered by the
Management Agents. One-click-access to the Remote Insight Lights Out
Edition board allows systems administrators to take full graphical control of
ProLiant servers in remote locations or lights-out data centres. Finally,
Insight Manager 7 in concert with the Version Control Agents and Version
Control Repository Manager enables systems administrators to version
manage and update system software across groups of Compaq ProLiant
servers.
Management Agents
The Management Agents
the foundation for Compaq's Intelligent Manageability strategy. They provide
direct, browser-based access to in-depth instrumentation built into ProLiant
servers, workstations, desktops, and portables, and send alerts to Insight
Manager 7 and other management consoles in case of subsystem or
environmental failures. For additional information about the Management
Agents and other management product from Compaq, please visit the
management Web site at http://www.compaq.com/manage.
Note: These Web sites are available in English only.
Compaq ActiveUpdate
ActiveUpdate is a web-based application that keep IT managers directly
connected to Compaq for proactive notification and delivery of the latest
software updates.
Compaq ROMPaq, support
The latest software, drivers, and firmware fully optimized and tested for your
software, and configuration utilities ProLiant server and options.
Compaq Survey Utility and
diagnostics utilities
The most advanced configuration analysis, reporting and troubleshooting
utilities used by Compaq and at your fingertips.
Compaq Health Driver
Health Drivers interface with the Integrated Lights-Out ASIC to provide
system management support, including monitoring of server components,
event logging and support for the Compaq Insight Management Agents.
Compaq iLO Management Interface The iLO Management Interface Driver provides access to the iLO
Driver
management processor for Insight Management Agents. This interface is
used to provide SNMP alert forwarding and management agent integration.
Note: For more information regarding ProLiant Essentials Software, please
Note: This Web site is available in English only.
DA-11411
Canada — Version 1 — August 26, 2002
6
QuickSpecs
ProLiant BL20p and p-Class system
Standard Features
Compaq ProLiant BL p-Class Server Blade Enclosure and Interconnects (continued)
Microsoft Windows 2000
OS Support
LINUX (Red Hat and SuSE )
Microsoft .NET Server
Note: For a more complete and up-to-date listing of supported OS’s and versions, please visit our OS Support
Note: For an up-to-date listing of the latest drivers available for the Compaq ProLiant BL p-Class, please see:
Note: These Web sites are available in English only.
Integrated Lights-Out Advanced (iLO)
Intelligent Manageability
Virtual Text and Graphical Remote Console *
Virtual Floppy *
Virtual Power Button Control
Dedicated LAN Connectivity
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) Security
IML and iLO Event Logging
Support for 12 user accounts with customizable access privileges
Automatic Server Recovery-2 (ASR-2)
Compaq Insight Manager 7
Redundant ROM
Remote Flash ROM
ROM Based Setup Utility (RBSU)
Advanced Configuration and Power Interface Specification Ready (ACPI)
Server Health Logs
Compaq Redundant Power Supply Utility
Pre-Failure Warranty (covers processors, as well as hard drives and memory)
Compaq Interconnect Switch Management System and Utilities (interconnect switch option)
Integrated Management Log (IML)
Off-Line Backup Processor capability
Dynamic sector repairing and drive parametre tracking (with Smart Array controllers)
Redundant/adaptive load balancing NIC Support
* Advanced features such as Graphical Remote Console and Virtual Floppy are included with the BL p-Class
server.
Power redundancy: Redundant AC feeds into power enclosures, redundant DC feeds from power enclosure to
server blade enclosures, 1 + 1 redundant power supplies
Availability
Two hot-plug SCSI hard drive bays and integrated RAID (Smart Array 5i) on every server blade (Battery-backed
write cache is optional.)
Redundant ROM on each server blade
ECC Memory
Interconnects Switch Availability
Hot-plug and hot- remove with configuration retention capability
Two network connections per server blade bay (four NICs total) routed to two redundant interconnect
switches
Redundant inter-switch communication with two sets of redundant uplink ports per each interconnect
switch
IEEE 802.1D Spanning tree protocol support for loop-free path redundancy
Static IEEE 802.3ad (EtherChannel compatible) trunking with automatic port load balancing
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing)
DA-11411
Canada — Version 1 — August 26, 2002
7
QuickSpecs
ProLiant BL20p and p-Class system
Standard Features
Compaq ProLiant BL p-Class Server Blade Enclosure and Interconnects (continued)
Power-on password
Administrator's password
Security
Integrated Lights-Out has 12 customizable user accounts and SSL encryption
Integrated Lights-Out can be disabled via a Global Setting
Interconnect Switch multilevel user names and passwords and management interface time out period setting
Up to 64 Port-based IEEE 802.1Q tagged VLANs per interconnect switch
Mounts in Compaq, and Telco racks and Third Party racks that meet the following criteria:
Minimum Rack Requirements
•
•
•
Compatible with 19-inch Standard EIA rail sets
EIA rail-to-rail depth is 29 − 30″
Cabinet depth must be at least 36-inch deep overall (Additional min. 3.5-inch clearance from rear
RETMA rail to rear door, inclusive in the 36-inch overall depth)
•
Ample room for top and bottom cable egress (approximately 8 square inches for full rack configuration
with patch panel)
•
•
•
•
Must be capable of supporting 1600 lb (for full rack configuration)
Perforated front and rear doors to accommodate front-to-back cooling
Must have 65% open perforation on server blade enclosure doors to support airflow requirements
Optimized for use with the Compaq 10000 Series racks
Note: If using Compaq 7000 Series rack, Compaq Rack Extension Kit and High Air Flow Rack Door options are
required.
•
Rack 9000 and 10000 series Cabinets
Rack Airflow Requirements
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The Compaq 9000 Series Rack and the new 10000 Series Racks
provides enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers
using the latest processors.
•
Rack 7000 series Cabinets
When installing a server with processors running at speeds of 550 MHz or greater in Compaq Rack
7000 series racks with glass doors (165753-001 (42U), and 163747-001 (22U)), the new processor
technology requires the installation of Compaq’s new High Airflow Rack Door Inserts (327281-B21
(42U), 327281-B22 (42U 6 pack), or 157847-B21 (22U)) to promote enhanced airflow for maximum
cooling.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow
and to prevent damage to the equipment:
o
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must
allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for ventilation).
o
Side: The clearance between the installed rack component and the side panels of the rack must
be a minimum of 2.75 inches (7 cm)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
Note: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with
the server, or to the server documentation located in the Support section at the following URL:
Note: This Web site is available in English only.
DA-11411
Canada — Version 1 — August 26, 2002
8
QuickSpecs
ProLiant BL20p and p-Class system
Standard Features
Compaq ProLiant BL p-Class Server Blade Enclosure and Interconnects (continued)
Compaq Services provides a three-year, limited warranty, including Pre-Failure Warranty (coverage of hard drives,
Service and Support
memory and processors) fully supported by a worldwide network of resellers and service providers. Compaq
technical assistance is available 7x24, toll free in the United States and Canada. Telephone support services may
be covered under warranty or available for an additional fee.
Note: Limited Warranty includes 3 year Parts, 3 year Labour, 3-year on-site support.
A full range of CarePaq packaged hardware and software services:
•
•
•
•
Installation and start up
Extended coverage hours and enhanced response times
System management and performance services
Availability and recovery services
Note: For more information, customer/resellers can contact
Please see the following URL regarding Warranty Information For Your Compaq Products:
For additional information regarding Worldwide Limited Warranty and Technical Support, please see the following
Note: These Web sites are available in English only.
Note: Certain restrictions and exclusions apply. Consult the Compaq Customer Support Centre at 1-800-567-1616
for details.
DA-11411
Canada — Version 1 — August 26, 2002
9
QuickSpecs
ProLiant BL20p and p-Class system
Models
Processor(s)
Cache Memory
Memory
(1) Intel Pentium III 1.40 GHz standard (up to 2 supported)
512-KB Level 2 writeback per processor
ProLiant BL20p P1400-512KB,
512MB (1P)
230040-B21
512 MB (Standard) to 4096 MB PC133-MHz Registered ECC SDRAM DIMM
Memory
Three Compaq NC3163 Fast Ethernet NIC PCI 10/100 with full WOL (Wake On
LAN); one NIC has PXE support
One additional 10/100 port dedicated to iLO Management
Network Controller
Smart Array 5i Controller (integrated on system board)
None ship standard
Storage Controller
Hard Drives
Up to 145.6-GB maximum (with optional hard drives)
None
Internal Storage
Optical Drive
Plugs vertically into Compaq ProLiant BL p-Class Server Blade Enclosure
Form Factor
Processor(s)
Cache Memory
Memory
(2) Intel Pentium III 1.40 GHz standard (up to 2 supported)
512-KB Level 2 writeback per processor
ProLiant BL20p P1400-512KB,
1GB (2P)
257959-B21
1024 MB (Standard) to 4096 MB PC133-MHz Registered ECC SDRAM DIMM
Memory
Three Compaq NC3163 Fast Ethernet NIC PCI 10/100 with full WOL (Wake On
LAN); one NIC has PXE support
One additional 10/100 port dedicated to iLO Management
Network Controller
Smart Array 5i Controller (integrated on system board)
None ship standard
Storage Controller
Hard Drives
Up to 145.6-GB maximum (with optional hard drives)
None
Internal Storage
Optical Drive
Plugs vertically into Compaq ProLiant BL p-Class Server Blade Enclosure
Form Factor
DA-11411
Canada — Version 1 — August 26, 2002
10
QuickSpecs
ProLiant BL20p and p-Class system
Options
230255-B21
ProLiant BL20p Unique Options Dual NC7780 Gigabit Upgrade Module for ProLiant BL20p
Note: The Dual NC7780 Gigabit Upgrade Module replaces two of the standard NC3163
Fast Ethernet Embedded WOL (Wake On LAN) NICs to two 10/10/1000T
NC7780 NICs.
Note: The GbE Interconnect Switch options support server NIC speeds to 100 Mbps. It
is recommended that the patch panel be used with the Dual NC7780 Gigabit
Upgrade Module if server NIC speeds to 1000 Mbps are required.
243564-B21
ProLiant BL p-Class Server Blade Enclosure (ProLiant Essentials Rapid Deployment
Pack Trial)
ProLiant BL p-Class Server Blade Enclosure (8 ProLiant Essentials Rapid Deployment
Pack Licenses)
281404-B21
230766-B21
ProLiant BL p-Class RJ-45 Patch panel (pair)
Note: Only one interconnect kit required per server blade enclosure.
ProLiant BL p-Class C-GbE Interconnect Kit (with pair of GbE Interconnect Switches
and two QuadT Interconnect Modules)
Note: Only one interconnect kit required per server blade enclosure.
ProLiant BL p-Class F-GbE Interconnect Kit (with pair of GbE Interconnect Switches
and two DualTSX Interconnect Modules)
249655-B21
279720-B21
Note: Only one interconnect kit required per server blade enclosure.
239162-001
230769-001
231710-001
231709-001
239161-B21
240563-B21
240560-B21
Single Phase Redundant Power with 4 power supplies
3 Phase Redundant Power with 6 power supplies
Single Phase Power Enclosure (empty)
3 Phase Power Enclosure (empty)
Single Power Supply
Facility DC Power Connection
ProLiant p-Class Scalable Bus Bar
ProLiant p-Class Mini Bus Bar
ProLiant p-Class Bus Power Box
240559-B21
240562-B21
ProLiant Essentials Value Pack
Software
Rapid Deployment Pack, 10 User, V1.x
Note: This license allows 10 servers to be managed and deployed via the Deployment
Server.
Note: Not necessary if you purchase the server blade enclosure with 8 Rapid
Deployment Pack licenses 281404-B21.
Rapid Deployment Pack, 1 User, V1.x
Note: This license allows 1 server to be managed and deployed via the Deployment
Server.
Note: Not necessary if you purchase the server blade enclosure with 8 Rapid
Deployment Pack licenses 281404-B21.
ProLiant Essentials Workload Management Pack (Featuring Compaq Resource
Partitioning Manager version 1.1)
269817-B21
267196-B21
266988-B21
Note: For more information regarding ProLiant Essentials Software, please see the following URL:
Note: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to URL
http://www.compaq.com/proliantessentials or the various ProLiant Essentials Value Pack product
QuickSpecs for more information.
Note: These Web sites are available in English only.
Processor
Pentium lll P1400-512KB Processor Option Kit
234277-B21
201695-B21
201694-B21
201693-B21
201692-B21
Memory (SDRAM DIMMs)
2048 MB PC133MHz Registered ECC SDRAM Memory Kit (2x1024 MB)
1024 MB PC133MHz Registered ECC SDRAM Memory Kit (2x512 MB)
512 MB PC133MHz Registered ECC SDRAM Memory Kit (2x256 MB)
256 MB PC133MHz Registered ECC SDRAM Memory Kit (2x128 MB)
DA-11411
Canada — Version 1 — August 26, 2002
11
QuickSpecs
Options
ProLiant BL20p and p-Class system
Wide Ultra3 SCSI – Universal Hot Plug
Hard Drives
72.8-GB Wide Ultra3 SCSI 10,000 rpm Drive (1″)
36.4-GB Wide Ultra3 SCSI 10,000 rpm Drive (1″)
18.2-GB Wide Ultra3 SCSI 10,000 rpm Drive (1″)
36.4-GB Wide Ultra3 SCSI 15,000 rpm Drive (1″)
18.2-GB Wide Ultra3 SCSI 15,000 rpm Drive (1″)
232432-B22
176496-B22
142673-B22
232916-B22
188122-B22
Storage Controllers
Communications
Battery Backed Write Cache Enabler Option Kit
255514-B21
Dual NC7780 Gigabit Upgrade Module for ProLiant BL20p
230255-B21
Note: The Dual NC7780 Gigabit Upgrade Module replaces two of the standard NC3163
Fast Ethernet Embedded WOL (Wake On LAN) NICs to two 10/10/1000T
NC7780 NICs.
Note: The GbE Interconnect Switch options support server NIC speeds to 100 Mbps. It
is recommended that the patch panel be used with the Dual NC7780 Gigabit
Upgrade Module if server NIC speeds to 1000 Mbps are required.
243564-B21
281404-B21
BL p-Class Server Blade
Enclosures
ProLiant BL p-Class Server Blade Enclosure (ProLiant Essentials Rapid Deployment
Pack Trial)
ProLiant BL p-Class Server Blade Enclosure (8 ProLiant Essentials Rapid Deployment
Pack Licenses)
230766-B21
249655-B21
BL p-Class Interconnects
ProLiant BL p-Class RJ-45 Patch panel (pair)
Note: Only one interconnect kit required per server blade enclosure.
ProLiant BL p-Class C-GbE Interconnect Kit (with pair of GbE Interconnect Switches
and two QuadT Interconnect Modules)
Note: Only one interconnect kit required per server blade enclosure.
ProLiant BL p-Class F-GbE Interconnect Kit (with pair of GbE Interconnect Switches
and two DualTSX Interconnect Modules)
279720-B21
Note: Only one interconnect kit required per server blade enclosure.
239162-001
230769-001
231710-001
231709-001
239161-B21
240563-B21
BL p-Class Power options
Single Phase Redundant Power with 4 power supplies
3 Phase Redundant Power with 6 power supplies
Single Phase Power Enclosure (empty)
3 Phase Power Enclosure (empty)
Single Power Supply
Facility DC Power Connection
240560-B21
Power Distribution
Diagnostic Options
ProLiant p-Class Scalable Bus Bar
ProLiant p-Class Mini Bus Bar
ProLiant p-Class Bus Power Box
240559-B21
240562-B21
230743-B21
ProLiant p-Class Diagnostic Station
Note: The Diagnostic Station allows access to the ProLiant BL20p server blade and the
BL p-Class interconnect switch outside of the server enclosure. The option
provides power and a data interface so that "offline" upgrade and diagnostic
functions may be performed.
DA-11411
Canada — Version 1 — August 26, 2002
12
QuickSpecs
ProLiant BL20p and p-Class system
Options
Compaq Rack 10000 Series
(Graphite Metallic)
Compaq Rack 10842 (42U) – Pallet
Compaq Rack 10647 (47U) – Pallet
Compaq Rack 10647 (47U) – Crated
Compaq Rack 10642 (42U) – Pallet
Compaq Rack 10642 (42U) – Shock Pallet
Compaq Rack 10642 (42U) – Crated
Compaq Rack 10636 (36U) – Pallet
Compaq Rack 10636 (36U) – Shock Pallet
Compaq Rack 10636 (36U) – Crate
Compaq Rack 10622 (22U) – Pallet
Compaq Rack 10622 (22U) – Shock Pallet
Compaq Rack 10622 (22U) – Crated
257415-B21
245160-B21
245160-B23
245161-B21
245161-B22
245161-B23
245162-B21
245162-B22
245162-B23
245163-B21
245163-B22
245163-B23
Note: -B21 (pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels)
-B23 (crated) used for air shipments of empty racks
Compaq Rack 9000 Series (Opal) Compaq Rack 9142 (42U) – Pallet
Compaq Rack 9142 (42U) – Shock Pallet
Compaq Rack 9142 (42U) – Crated
120663-B21
120663-B22
120663-B23
120664-B21
120664-B22
120664-B23
120665-B21
120665-B22
120665-B23
222192-B21
Compaq Rack 9136 (36U) – Pallet
Compaq Rack 9136 (36U) – Shock Pallet
Compaq Rack 9136 (36U) – Crated
Compaq Rack 9122 (22U) – Pallet
Compaq Rack 9122 (22U) – Shock Pallet
Compaq Rack 9122 (22U) – Crated
Compaq Rack 9842 (800mm wide, 42U) - Pallet
Note: -B21 (pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels)
-B23 (crated) used for air shipments of empty racks
Rack Options for Compaq Rack
10000 Series
Rack Blanking Panels – Graphite (Multi)
Note: Contains one each of 1U, 2U, 3U and 4U panel.
Rack Blanking Panels – Graphite (1U)
Note: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (1U).
253214-B26
253214-B21
253214-B22
253214-B23
253214-B24
Rack Blanking Panels – Graphite (2U)
Note: The Rack Blanking Panels (PN 253214-B22) contains 10 each of (2U).
Rack Blanking Panels – Graphite (3U)
Note: The Rack Blanking Panels (PN 253214-B23) contains 10 each of (3U).
Rack Blanking Panels – Graphite (4U)
Note: The Rack Blanking Panels (PN 253214-B24) contains 10 each of (4U).
Rack Blanking Panels – Graphite (5U)
Note: The Rack Blanking Panels (PN 253214-B25) contains 10 each of (5U).
800mm Stabilizer Option Kit (Graphite)
253214-B25
255488-B21
Note: The 800mm Stabilizer Kit (PN 255488-B21) supports the Rack 9842 only.
600mm Stabilizer Kit – Graphite
246107-B21
248929-B21
246099-B21
257413-B21
Baying Kit for Rack 10000 series (Carbon)
42U Side Panel – Graphite Metallic
110V Fan Kit (Graphite)
Note: Roof Mount Includes power cord withIEC320-C13 to NEMA 5-15P.
DA-11411
Canada — Version 1 — August 26, 2002
13
QuickSpecs
ProLiant BL20p and p-Class system
Options
Rack Options for Compaq Rack
10000 Series (continued)
220V Fan Kit (Graphite)
Note: Roof Mount Includes power cord with IEC320-C13 to NEMA 6-15P.
257414-B21
36U Side Panel – Graphite Metallic
47U Side Panel – Graphite Metallic
9000/10000 Series Offset Baying Kit
246102-B21
255486-B21
248931-B21
Note: This kit can be used to connect 9000 and 10000 series racks in 42U height
together. Kit contents include hardware for connecting racks and a panel to cover
the 100mm gap at the rear of the two racks.
Rack Options for Compaq Rack
9000 Series
Baying/Coupling Kit
120669-B21
120670-B21
42U Side Panel
Note: The 42U Side Panel (PN 120670-B21) supports the Compaq Rack 9142 and
Compaq Rack 9842.
36U Side Panel
120671-B21
Note: The 36U Side Panel (PN 120671-B21) supports the Compaq Rack 9136.
600mm Stabilizer Option Kit
800mm Stabilizer Option Kit (Opal)
120673-B21
234493-B21
Note: The 800mm Stabilizer Kit (PN 234493-B21) supports the Rack 9842 only
Grounding Rack Option Kit
Stabilizer Option Kit
120682-B21
120673-B21
169940-B21
Rack Blanking Panel (Multi)
Note: Kit includes four panels in 1U, 2U, 4U, and 8U.
9142 Extension Kit
120679-B21
189453-B21
189453-B22
189453-B23
189453-B24
189453-B25
Note: The 9142 Extension Kit (PN 120679-B21) supports the Compaq Rack 9142 only.
Rack Blanking Panels (1U)
Note: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (1U).
Rack Blanking Panels (2U)
Note: The Rack Blanking Panels (PN 189453-B22) contains 10 each of (2U).
Rack Blanking Panels (3U)
Note: The Rack Blanking Panels (PN 189453-B23) contains 10 each of (3U).
Rack Blanking Panels (4U)
Note: The Rack Blanking Panels (PN 189453-B24) contains 10 each of (4U).
Rack Blanking Panels (5U)
Note: The Rack Blanking Panels (PN 189453-B25) contains 10 each of (5U).
9136 Extension Kit
218216-B21
218217-B21
9142 Short Rear Door
Note: The 9142 Short Rear Door (PN 218217-B21) supports the Compaq Rack 9142
only.
Split Rear Door (Opal)
254045-B21
Note: The Split Rear Door (PN 254045-B21) supports the 600 mm wide, 42U 9000
series rack.
9136 Short Rear Door
218218-B21
9142 Split Rear Door
9000/10000 Series Offset Baying Kit
254045-B21
248931-B21
Note: This kit can be used to connect 9000 and 10000 series racks in 42U height
together. Kit contents include hardware for connecting racks and a panel to cover
the 100mm gap at the rear of the two racks.
DA-11411
Canada — Version 1 — August 26, 2002
14
QuickSpecs
ProLiant BL20p and p-Class system
Options
Rack Options for Compaq Rack
7000 Series and Telco racks
High Air Flow Rack Door Insert for 7122
157847-B21
327281-B21
327281-B22
292407-B21
292406-B21
154392-B21
High Air Flow Rack Door Insert for 7142 (single)
High Air Flow Rack Door Insert for 7142 (6-pack)
Compaq Networking Cable Management Kit
Compaq Networking Recessed Rail Management Kit
Compaq Rack Extension Kit for 7142
Rack Options for Compaq Rack
10000, 9000 and 7000 Series
Monitor Utility Shelf
303606-B21
Ballast Option Kit
120672-B21
234672-B21
100kg Sliding Shelf
Rack Rail Adapter Kit (25″ depth)
Monitor/Utility Shelf - Graphite
Depth Adjustable Fixed Rail
Cable Management D-Rings Kit
Console Management Controller (CMC) Option Kit
120675-B21
253449-B21
332558-B21
168233-B21
203039-B21
Console Management Controller (CMC) Sensors Option Kit
Console Management Controller (CMC) Locking Option Kit
Console Management Controller (CMC) Smoke Sensor Option Kit
203039-B22
203039-B23
203039-B24
Rack Options for Telco Racks
Bus Bar Telco Rail Option Kit
Enclosure Telco Rail Option Kit
245249-B21
266076-B21
Service and Support Offerings
(CarePaq Services)
Hardware Services 4-Hour On-site Service
3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a fully configured
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server
blades, power enclosure with power supplies and power distribution. (6-3 part number
for US)
274369-002
274370-002
302329-001
302330-001
3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a fully configured
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server
blades, power enclosure with power supplies and power distribution. (6-3 part number
for US)
3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a fully configured
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server
blades, power enclosure with power supplies and power distribution. Electronic
CarePaq service. (6-3 part number for US)
3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a fully configured
ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server
blades, power enclosure with power supplies and power distribution. Electronic
CarePaq service. (6-3 part number for US)
Installation & Start-up Services
Install ProLiant BL p-Class server blade enclosure including up to 8 ProLiant BL p-Class
server blades and interconnects, power enclosure with power supplies and power
distribution. (6-3 part number for US)
Install ProLiant BL p-Class server blade enclosure including up to 8 ProLiant BL p-Class
server blades and interconnects, power enclosure with power supplies and power
distribution. Electronic CarePaq service. (6-3 part number for US)
274371-002
302331-001
274545-002
Provides for the Installation and Start-up of Rapid Deployment Pack on a Customer
supplied server designated as a Deployment Server. Includes the deployment of a
single server. This new server will be deployed using either one of the pre-configured
scripts or an image. In addition, the service will provide for the capture and storage of
the configuration of the newly deployed server and orientation on product usage. To be
delivered during standard office ours, standard office days. (6-3 part number for US)
Note: For more information, customer/resellers can contact:
DA-11411
Canada — Version 1 — August 26, 2002
15
QuickSpecs
Memory
ProLiant BL20p and p-Class system
ProLiant BL20p Server Blade (2P Model)
STANDARD MEMORY
1024-MB PC133 MHz Registered ECC SDRAM DIMM installed (2 x 512-MB SDRAM DIMM)
STANDARD MEMORY PLUS OPTIONAL MEMORY
Up to 3072-MB of SDRAM DIMM memory is available with the installation of optional SDRAM DIMM memory expansion kits.
STANDARD MEMORY REPLACED WITH OPTIONAL MEMORY
Up to 4096-MB of SDRAM DIMM memory is available with the removal of standard memory and the installation of optional SDRAM DIMM memory expansion
kits.
Memory
Standard
Optional
Maximum
Slot
1
2
3
4
1024 MB
3072 MB
4096 MB
512 MB
512 MB
1024 MB
512 MB
512 MB
1024 MB
Empty
Empty
1024 MB
1024 MB
1024 MB
1024 MB
Following are memory options available from Compaq:
201695-B21
201694-B21
201693-B21
201692-B21
•
•
•
•
2048-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 1024 MB)
1024-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 512 MB)
512-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 256 MB)
256-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 128 MB)
ProLiant BL20p Server Blade (1P Model)
STANDARD MEMORY
512-MB PC133 MHz Registered ECC SDRAM DIMM installed (2 x 256-MB SDRAM DIMM)
STANDARD MEMORY PLUS OPTIONAL MEMORY
Up to 2560-MB of SDRAM DIMM memory is available with the installation of optional SDRAM DIMM memory expansion kits.
STANDARD MEMORY REPLACED WITH OPTIONAL MEMORY
Up to 4096-MB of SDRAM DIMM memory is available with the removal of standard memory and the installation of optional SDRAM DIMM memory expansion
kits.
Memory
Standard
Optional
Maximum
Slot
1
2
3
4
512 MB
2560 MB
4096 MB
256 MB
256 MB
1024 MB
256 MB
256 MB
1024 MB
Empty
Empty
1024 MB
1024 MB
1024 MB
1024 MB
Following are memory options available from Compaq:
201695-B21
201694-B21
201693-B21
201692-B21
•
•
•
•
2048-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 1024 MB)
1024-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 512 MB)
512-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 256 MB)
256-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 128 MB)
DA-11411
Canada — Version 1 — August 26, 2002
16
QuickSpecs
ProLiant BL20p and p-Class system
Technical Specifications
Dimensions
Height
Width
Depth
10.5 in /26.67 cm
17.60 in/44.70 cm
28.86 in/73.30 cm
Compaq ProLiant BL p-Class
Server Blade Enclosure
Input Specifications
Rated input voltage
Rated input current
Rated input Power
-43 VDC to -53 VDC Nominal -48 VDC
62.5 A at -48 VDC
3000 W
Individual server blade bay Rated input voltage
-43 VDC to -53 VDC Nominal -48 VDC
6.25 A at -48 VDC
ratings
Rated input current
Rated input Power
300 W
Temperature range
Operating
50° to 95° F/10° to 35° C
-22° to 140° F/-30° to 60° C
20% to 80%
Non-Operating
Operating
Relative humidity
(non-condensing)
Non-Operating
Operating
5% to 95%
Wet bulb temperature
82.4° F/28° C
Non-Operating
101.7° F/38.7° C
Note: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight.
Upper operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/ 9,144
m or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of
113° F/45° C. Altitude maximum for storage is 70 KPa.
Dimensions
Height
1.69 in/4.29 cm
Operating and Performance
Specifications for ProLiant BL20p Server
Blade
Width
10.29 in/26.14 cm
28.00 in/71.12 cm
Depth
Weight (maximum)
18.0 lb/8.17 kg
Operating
Non-operating
Shipping
Temperature range
50° to 95° F/10° to 35° C
-40° to 140° F/-40° to 60° C
-4° to 140° F/-20° to 60° C
10% to 90%
Storage
Relative humidity
(non-condensing)
Operating
Non-operating
Shipping
10% to 90%
10% to 95%
Storage
Maximum wet bulb
temperature
82° F/28° C
Note: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight.
Upper operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/ 9,144
m or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of
113° F/45° C. Altitude maximum for storage is 70 KPa.
DA-11411
Canada — Version 1 — August 26, 2002
17
QuickSpecs
ProLiant BL20p and p-Class system
Technical Specifications
10.405 in/26.43 cm
1.535 in/3.899 cm
27.697 in/70.35 cm
Dimensions
Height
Width
Depth
Operating and Performance
Specifications for RJ-45 Patch Panel
Capability
IEEE 802.2, 802.3, 802.3u
10 Base-T (half-duplex)
10 Base-T (full-duplex)
100 Base-TX (half-duplex)
100 Base-TX (full-duplex)
1000 Base-TX (full-duplex)
RJ-45
10 Mbps
Network transfer rate
20 Mbps
100 Mbps
200 Mbps
1000 Mbps
Connector
Cable support
10 Base-TX
Categories 3, 4, or 5 UTP (2 or 4 pair); up to
328 ft/100 m
100 Base-TX
1000 Base-TX
Category 5 UTP (2 pair); up to 328 ft/100 m
Category 5E (4 pair); up to 328 ft/100 m
Power requirements
Temperature range
200 mA at +5V DC; 500 mA at -48V
Operating
50° to 95° F/10° to 35° C
-22° to 140° F/-30° to 60° C
20% to 80%
Non-operating
Operating
Relative humidity (non-
condensing)
5% to 95%
Non-operating
Operating
82.4° F/28° C
Wet bulb temperature
101.7° F/38.7° C
Non-operating
Note: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight.
Upper operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/ 9,144
m or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of
113° F/45° C. Altitude maximum for storage is 70 KPa.
DA-11411
Canada — Version 1 — August 26, 2002
18
QuickSpecs
ProLiant BL20p and p-Class system
Technical Specifications
Dimensions
Operating and Performance
Specifications for Interconnect
GbE Switch
Height
Width
Depth
10.405 in/26.43 cm
1.535 in/3.899 cm
27.697 in/70.35 cm
Weight
11.5 lb/5.2 kg per interconnect switch
Performance
3.2 Gbps Switching bandwidth per server enclosure
4.4 Gbps uplink bandwidth per server enclosure
9.6 Million pps aggregate throughput per server enclosure (64-byte packets)
Full-wire speed for all connections
Auto-negotiation and auto-sensing with full-duplex support
Store and forward
Forwarding mode
MAC Addresses
8,191 per interconnect switch; MAC address based filtering and MAC address
packet priority configuring
Forwarding table age time
Memory
Maximum age: 10 to 9999 seconds; default: 3000 seconds
32MB Main, 6MB flash and 16MB packet buffer per interconnect switch
Compliance
IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.1D, 802.1p, 802.3ac, 802.3ad
(Static), 802.1Q, and 802.3x
SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233),
801.1Q MIB (RFC 2684), RMON1 MIB (RFC 1757) groups 1, 2, 3, and 9, and
Ethernet MIB (RFC1643)
Network transfer rate
10 Base-T (half-duplex)
10 Base-T (full-duplex)
10 Mbps
20 Mbps
100 Base-TX (half-duplex)
100 Base-TX (full-duplex)
1000 Base-TX (half-duplex)
1000 Base-TX (full-duplex)
1000 Base-SX (full-duplex)
100 Mbps
200 Mbps
1000 Mbps
2000 Mbps
2000 Mbps
Connector
EMI
RJ-45, DB-9 (C-GbE Interconnect Kit)
LC fiber, RJ-45, DB-9 (F-GbE Interconnect Kit)
FCC Class A
ICES-003 Class A
AS/NZS 3548 Class A
VCCI Class A
Safety
UL/CUL Listed Accessory
Power requirements
Temperature range
48V: 1050 mA, 50 W maximum (per interconnect switch)
Operating
50° to 95° F/10° to 35° C
-22° to 140° F/-30° to 60° C
Non-operating
Operating
Non-operating
20% to 80%
5% to 95%
Relative humidity
(non-condensing)
Operating
82.4° F/28° C
Wet bulb temperature
Non-operating
101.7° F/38.7° C
Note: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight. Upper
operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/ 9,144 m or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of
113° F/45° C. Altitude maximum for storage is 70 KPa.
DA-11411
Canada — Version 1 — August 26, 2002
19
QuickSpecs
ProLiant BL20p and p-Class system
Technical Specifications
Operating and Performance
Specifications for Power
Enclosures
Single-Phase Model
Three-Phase Model
5.25 in/13.34 cm
5.25 in/13.34 cm
Dimensions
Height
27.15 in/68.96 cm
17.60 in/44.7 cm
47.5 lb/21.55 kg
99.5 lb/45.13 kg
200 VAC to 240 VAC
27.15 in/68.96 cm
17.60 in/44.7 cm
47.5 lb/21.55 kg
125.5 lb/56.93 kg
Width
Depth
Weights
No hot-plug power supplies
All hot-plug power supplies
Rated input voltage
200 VAC to 240 VAC line
to line
Input requirements
60 Hz
24A
60 Hz
Rated input frequency
Rated input current per side
Rated input power per side
Power cord
24A per phase
9976 W
5760 W
1 NEMA L6-30P per side 1 NEMA L15-30 per side
-48.8 VDC to -54 VDC
99A
-48.8 VDC to -54 VDC
170A
Output voltage
specifications
Rated output voltage
Rated output current
Rated output power
Nominal power
4298 W
8310 W
4158 W at 208 VAC
7202 W at 208 VAC
Ambient temperature
range (See note)
Operating
50° to 95° F/10° to 35° C 50° to 95° F/10° to 35° C
-22° to 140°F/-30° to 60°C -22° to 140°F/-30° to 60°C
Shipping
20% to 80%
5% to 95%
20% to 80%
5% to 95%
Relative humidity,
non-condensing
(See note)
Operating
Non-operating
82.4° F/28° C
82.4° F/28° C
Wet bulb temperature
Operating
101.7° F/38.7° C
101.7° F/38.7° C
Non-operating
Note: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight. Upper
operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/ 9,144 m or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of
113° F/45° C. Altitude maximum for storage is 70 KPa.
DA-11411
Canada — Version 1 — August 26, 2002
20
QuickSpecs
ProLiant BL20p and p-Class system
Technical Specifications
Operating and Performance
Power Bus Box
Mini Bus Bar
Scalable Bus Bar
Specifications for Power
Distribution Devices
Power enclosures or facility
DC feeds supported
(3U each)
1
1
2
Server blade enclosures
1
3
5
supported (6U each)
Total rack height of supported
enclosures
9U
21U
36U
Dimensions
5.1 in/12.95 cm
19.45 in/49.40 cm
19.74 in/50.14 cm
2.2 in/5.59 cm
48.57 in/123.37 cm
19.74 in/50.14 cm
2.2 in/5.59 cm
Height
3.6 in/9.14 cm each
3.25 in/8.26 cm
3.62 lb/1.64 kg
Width
Depth
Weight
13.2 lb/59.9 kg
26 lb/11.79 kg
Rated operating voltage
Max total power supported
-43.2 VDC to -54 VDC
3000 W
-43.2 VDC to -54 VDC -43.2 VDC to -54 VDC
9000 W 15,000 W
Total max input current at
minimum voltage
69.44 A at -43.2VDC
208.32 A at -43.2 VDC 347.2 A at -43.2 VDC
(equivalent of 175A per
feed)
Total max input current at
nominal voltage
62.5 A at -48VDC
187.5 A at -48 VDC
312.5 A at -48 VDC
(equivalent of 175A per
feed)
Max current per power feed 70A
210A
210A
Max local ambient
temperature
149° F/65° C
149° F/65° C
149° F/65° C
Note: All systems support redundant A & B feeds. Scalable bus bar supports dual A and dual B feeds.
DA-11411
Canada — Version 1 — August 26, 2002
21
QuickSpecs
ProLiant BL20p and p-Class system
Technical Specifications
Operating and Performance
Specifications for Facility DC
Voltage
Nominal input voltage
-48 VDC
Operating voltage range
-48VDC ± 10% or -43.2 VDC to -52.8 VDC
Max Input voltage slew rate
0.5V/uS
Redundant feed voltages*
(A & B)
*A and B feeds must differ by no more than
5VDC during steady state operation
Ripple/Noise
Overshoot
480 mV PARD**
Must remain within regulation limits on all feeds
during startup or shutdown
Voltage transients
Must not exceed -60 VDC
Current
Max steady state input current 62.5A per server blade enclosure installed at
-48VDC
Max steady state current per
feed/total
Power bus boxes
Mini bus bars
70 A/70A
210 A/210A
Scalable bus bars
210 A/350A or equivalent of 175A per feed*
In-rush current
Must support up to 2X the maximum operating current per server blade
enclosure (125 A) for up to 1.0 mS
Input over-current
Customer provided fusing for facility DC feeds that protects the system from
catastrophic over-current within 20 uS. Fuse should sustain all in-rush and
operating currents.
Max Input Current Slew Rate 1A/uS
Max Rated Power
3000W per server blade enclosure
Compaq provided facility DC cable connection kit:
Connections and Cables
•
The facility DC connection kit supports the connection of up to four -
48VDC, RETURN pairs and ground.
The power cable assemblies consist of 1/0AWG, colour-coded, flexible cable
rated at 105° C, terminated with bus mating connectors at one end and
unterminated at the other end. The cable length provided enables the customer
to route to a fuse panel within or adjacent to the rack.
Note: *All systems support redundant A and B feeds. Scalable bus bars support dual A and dual B feeds.
** Periodic and random noise (PARD). Maximum allowable peak-to-peak ripple and noise (as measured at
the load on any output channel). The ripple and noise is measured over a 20 Hz to 100 MHz frequency
band. A resistive load (non-electronic) is used for this measurement. Each output is by-passed to return
by a 10uF tantalum capacitor with an ESR less than 100 milli-Ohms in parallel with a 0.47 uF ceramic
capacitor, at the point of load. The load cable is 12 feet of twisted wire capable of carrying the current.
The printed wiring board assembly is installed in its enclosure for this measurement, or the measurement
leads are properly shielded with Earth grounds applied to the insert.
DA-11411
Canada — Version 1 — August 26, 2002
22
QuickSpecs
ProLiant BL20p and p-Class system
Technical Specifications
Compaq Rack 10842
Dimensions
Total Cabinet
Shipping
Colour
(42U)(optional)
Height
78.7 in/199.9 cm
85in/215.9 cm
Depth
Width
39.691 in/100.82 cm
31.5 in/ 80.01cm
48 in/121.92 cm
Graphite Metallic – doors
Carbon – frame
43.5 in/110.49 cm
Weight
295 lb/133.8 kg
335lb/151.95 kg
Compaq Rack 10647
Dimensions
Total Cabinet
Shipping
Colour
(47U)(optional)
Height
89.96 in/228.5 cm
95.47 in/242.49 cm
Depth
Width
Weight
39.691 in/100.82 cm
24 in/60.96 cm
245 lb/111 kg
48 in/121.92 cm
32 in/81.28 cm
284 lb/129 kg
Graphite Metallic – doors
Carbon – frame
Compaq Rack 10642
(42U)(optional)
Dimensions
Height
Total Cabinet
78.7 in/199.90 cm
Shipping
86.22 in/219 cm
Colour
Depth
Width
Weight
39.691 in/100.82 cm
24 in/ cm
48 in/121.92 cm
32 in/81.28 cm
325 lb/147.52 kg
Graphite Metallic – doors
Carbon – frame
253 lb/114.84 kg
Compaq Rack 10636
Dimensions
Total Cabinet
Shipping
Colour
(36U)(optional)
Height
68.6 in/174.24 cm
75.25 in/191.14 cm
Graphite Metallic – doors
Carbon – frame
Depth
Width
Weight
39.691 in/100.82 cm
24 in/60.96 cm
220 lb/100 kg
48 in/121.92 cm
32 in/81.28 cm
272 lb/123 kg
Compaq Rack 10622
(22U)(optional)
Dimensions
Height
Total Cabinet
43 in/109.22 cm
Shipping
52.25 in/132.72 cm
Colour
Depth
Width
Weight
39.691 in/100.82 cm
24 in/60.96 cm
48 in/121.92 cm
32 in/81.28 cm
225 lb/102.13 kg
Graphite Metallic – doors
Carbon – frame
176 lb/79.89 kg
Compaq Rack 9842
(42U)(optional)
Dimensions
Height
Total Cabinet
78.7 in/199.9 cm
Shipping
86.22 in/219 cm
Colour
Depth
Width
Weight
35.8 in/90.932 cm
31.5 in/80.01 cm
374 lb/170 kg
48 in/121.92 cm
38.8 in/98.55 cm
440 lb/200 kg
Opal
DA-11411
Canada — Version 1 — August 26, 2002
23
QuickSpecs
ProLiant BL20p and p-Class system
Technical Specifications
Compaq Rack 9142
(42U)(optional)
Dimensions
Total Cabinet
78.7 in/199.9 cm
35.8 in/90.932 cm
23.7 in/60.2 cm
253 lb/114.84 kg
Shipping
83.38 in/211.79 cm
48 in/121.92 cm
32 in/81.28 cm
325 lb/147.52 kg
Colour
Height
Depth
Width
Weight
Opal
Compaq Rack 9136
(36U)(optional)
Dimensions
Height
Total Cabinet
68.6 in/174.24 cm
Shipping
75.25 in/191.14 cm
Colour
Depth
Width
Weight
35.8 in/90.932 cm
23.7 in/60.2 cm
165 lb/75 kg
48 in/12.192 cm
32 in/81.28 cm
234 lb/106 kg
Opal
Compaq Rack 9122
(22U)(optional)
Dimensions
Height
Total Cabinet
43 in/109.22 cm
Shipping
52.25 in/132.72 cm
Colour
Depth
Width
Weight
35.8 in/90.932 cm
24 in/60.96 cm
176 lb/79.89 kg
48 in/121.92 cm
32 in/81.28 cm
225 lb/102.13 kg
Opal
© 2002 Compaq Canada Corporation. All rights reserved. Printed in Canada.
Compaq, the Compaq logo, ActiveUpdate, CarePaq, Insight Manager, ProLiant and ROMPaq are trademarks of Compaq Information Technologies Group,
L.P. in the U.S. and/or other countries. Microsoft, Microsoft.NET and Windows are registered trademarks or trademarks of Microsoft Corporation in the U.S.
and/or other countries. Intel and Pentium are registered trademarks or trademarks of Intel Corporation in the U.S. and/or other countries. Linux is a registered
trademark or trademark of Linus Torvalds in the U.S. and/or other countries. Red Hat is a registered trademark or trademark of Red Hat Inc., in the U.S., and
other countries. All other product names mentioned herein may be trademarks of their respective companies.
Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information is provided “as is” without warranty of any kind and
is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such
products. Nothing herein should be construed as constituting an additional warranty.
DA-11411
Canada — Version 1 — August 26, 2002
24
|